Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
drbarry920  
#1 Posted : Tuesday, June 28, 2011 9:28:31 AM(UTC)
drbarry920

Rank: Member

Groups: Registered
Joined: 6/28/2011(UTC)
Posts: 1

Hello,
It seems that the braces that hold our dishwasher into the cabinet are no longer stable. Lately when we open the dishwasher, especially when loaded, the top of the dishwasher leans out of the cabinet. Is there any instructions on how to repair these braces?
Thank You
Barry
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Tuesday, June 28, 2011 4:25:07 PM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
You model number is missing about 6 to 8 digits.

Sometimes there are brackets to hold the front of the dishwasher to the front of the counter top. Perhaps the screw has fallen out or the wood has rotted. In any case this is not the preferred way to do it.

There are anti-tip brackets available. Basically it is a u bracket that fits over/around the back feet and you screw it to the floor.

Also often there are holes in the bottom frame at the back that you can use a long screw to hold the rear end down.
THIS FORUM IS DEAD!!!!!!!
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.