Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Davie Ninefingers  
#1 Posted : Friday, November 28, 2008 10:16:36 AM(UTC)
Davie Ninefingers

Rank: Member

Groups: Registered
Joined: 11/28/2008(UTC)
Posts: 2

This is a "built in" double electric self cleaning oven. I need to remove the outer door panel to clean the glass and interior between the glass panels.

It appears that the door must be removed to get access to the torx screws on the bottom of the door. How do you remove the door from its hinges???

Davie Nine Fingers
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
abadfish66  
#2 Posted : Friday, November 28, 2008 10:32:40 AM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620

At the hinge there is a locking clip on each side, it has a small square hole. Get a screwdriver and pull those clips back, then slowly close the door till the door catches on those locks. Then push the door like your closing it and the hinges will release from the oven.
Davie Ninefingers  
#3 Posted : Friday, November 28, 2008 12:55:58 PM(UTC)
Davie Ninefingers

Rank: Member

Groups: Registered
Joined: 11/28/2008(UTC)
Posts: 2

THANKS very much. I never would have guessed it was that easy!:)
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.