removing the face plate for the ice dispenser Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: KSRS22QFWH00	Brand: Kitchen Aid	Age: 5 - 10 years
Previous Topic Next Topic

heed		#1 Posted : Friday, November 14, 2008 7:02:03 AM(UTC)
Rank: Member Groups: Registered Joined: 11/14/2008(UTC) Posts: 8		I just bought a ice dispenser flapper door kid. I need to know how to remove the face plate so I can install the door support with the new design
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

magician59		#2 Posted : Friday, November 14, 2008 7:06:26 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/16/2007(UTC) Posts: 3,273		First remove drip tray. Look for screws underneath it. Remove them. Then apply upward pressure on the trim. Sometimes it is retained on a tab or track. Other times it is just stuck in place with double-sided tape. Avoid random prying: If you have to force it off, chances are that's NOT the way it went on.
User Profile View All Posts by User View Thanks

heed		#3 Posted : Friday, November 14, 2008 7:12:15 AM(UTC)
Rank: Member Groups: Registered Joined: 11/14/2008(UTC) Posts: 8		I don't see any screw after removing the drip tray. Is there any other way
User Profile View All Posts by User View Thanks

magician59		#4 Posted : Friday, November 14, 2008 7:52:44 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/16/2007(UTC) Posts: 3,273		Proceed as mentioned above. Just remember not to force anything. On a Whirlpool, expect double sided tape.
User Profile View All Posts by User View Thanks

heed		#5 Posted : Friday, November 14, 2008 11:51:03 AM(UTC)
Rank: Member Groups: Registered Joined: 11/14/2008(UTC) Posts: 8		it is not a whirlpool fridge, it's a 9 year old kitchen aid...there's not screw underneath the drip pan....any help will be appreciated....
User Profile View All Posts by User View Thanks

magician59		#6 Posted : Friday, November 14, 2008 12:06:43 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/16/2007(UTC) Posts: 3,273		Pry it gently at the bottom of the trim, and when it is free, slide it up.
User Profile View All Posts by User View Thanks

heed		#7 Posted : Friday, November 14, 2008 6:45:33 PM(UTC)
Rank: Member Groups: Registered Joined: 11/14/2008(UTC) Posts: 8		thank you for your help...have a nice day
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (4)