Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Shocking washer
Options
Go to last post Go to first unread
Brand: -brand- Age: Less than 1 year
Previous Topic Next Topic
jimin8  
#1 Posted : Tuesday, November 11, 2008 1:07:40 PM(UTC)
jimin8

Rank: Member

Groups: Registered
Joined: 11/11/2008(UTC)
Posts: 1
I just installed a new washer and dryer. As I was pushing the washer back to the wall I got a significant shock. If you lean against the washer and touch the back of the control panel you get a jolt. Tested the wall outlet, tester says it is wired correctly with proper ground. 125 volts. I don't want to use it till I figure out what's wrong. Anyone have any ideas?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
tfam4  
#2 Posted : Tuesday, November 11, 2008 1:21:36 PM(UTC)
tfam4

Rank: Member

Groups: Registered
Joined: 11/10/2008(UTC)
Posts: 4
Originally Posted by: jimin8 Go to Quoted Post
I just installed a new washer and dryer. As I was pushing the washer back to the wall I got a significant shock. If you lean against the washer and touch the back of the control panel you get a jolt. Tested the wall outlet, tester says it is wired correctly with proper ground. 125 volts. I don't want to use it till I figure out what's wrong. Anyone have any ideas?

did u just buy it ??
Back to top
Drags1998  
#3 Posted : Tuesday, November 11, 2008 1:27:10 PM(UTC)
Drags1998

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/7/2008(UTC)
Posts: 750
If its brand new, CALL FOR SERVICE!!! If its used, unplug it and open the console and have a look.:)
Back to top
denman  
#4 Posted : Tuesday, November 11, 2008 1:36:39 PM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Get it fixed under warranty just make sure they do not try and bill you for the service call as this is a safety issue.

Sounds like the console is plastic with the back of the console metal and a wire is touching the metal back plate which is floating because of the plastic mounting. In the old days they would of had to run a ground stap from the back plate to chassis to ensure it was grounded.
THIS FORUM IS DEAD!!!!!!!
Back to top
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET