Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
bethgsimm  
#1 Posted : Wednesday, October 17, 2007 6:58:36 AM(UTC)
bethgsimm

Rank: Member

Groups: Registered
Joined: 10/17/2007(UTC)
Posts: 2

Yet another F1 error code question,
Will the control panel alone be able to fix my f1 error code on my GE JKP54GOV1bb . I did hit clear a few times and it finally stopped beeping, but I have not turned it back on yet to see if it starts again.

Or is there a seperate clock part that I may need to purchase as well.

Thanks in advance
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Pegi  
#2 Posted : Wednesday, October 17, 2007 9:54:10 AM(UTC)
Pegi

Rank: Advanced Member

Groups: Senior Expert
Joined: 10/3/2007(UTC)
Posts: 73

Age: Less than 1 year
Why are you buying anything??? Call for warranty service...
bethgsimm  
#3 Posted : Wednesday, October 17, 2007 12:23:43 PM(UTC)
bethgsimm

Rank: Member

Groups: Registered
Joined: 10/17/2007(UTC)
Posts: 2

typo in original post, the unit is 10-12 years old
kawfeeman  
#4 Posted : Sunday, January 20, 2008 9:31:47 AM(UTC)
kawfeeman

Rank: Advanced Member

Groups: Senior Expert
Joined: 12/13/2007(UTC)
Posts: 323

ohm out your oven sensor ( should be @ 1070 at room temp ) and check to see if the touch pad is part of or separate from the clock ..
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.