maytag atlantis won't fill on rinse cycle Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: MAV6300AWW	Brand: Maytag	Age: 1 - 5 years
Previous Topic Next Topic

flatslide		#1 Posted : Wednesday, November 5, 2008 10:10:35 PM(UTC)
Rank: Member Groups: Registered Joined: 11/5/2008(UTC) Posts: 3		my washer works properly most of the time. then it wont fill tub, the water runs out the drain hose. the hose is 2'' above washer then drops down and out 2ft past washer into floor drain. if hose is lifted abve washer tub will fill and continue through cycles. timer was replaced, was told it was weak, still does same thing.
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

kayakcrzy		#2 Posted : Thursday, November 6, 2008 4:23:04 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/1/2008(UTC) Posts: 2,429		You have having a syphon effect. Raise the drain hose and keep it there. Tom ApplianceEducator.com
User Profile View All Posts by User View Thanks

flatslide		#3 Posted : Thursday, November 6, 2008 8:10:20 AM(UTC)
Rank: Member Groups: Registered Joined: 11/5/2008(UTC) Posts: 3		Originally Posted by: kayakcrzy You have having a syphon effect. Raise the drain hose and keep it there. Tom ApplianceEducator.com the drain hose is all one piece, not like most homes where the hose is hung on a stack. should i seperate the the hose and hang it on a stack. is the problem because it's all one piece?
User Profile View All Posts by User View Thanks

kayakcrzy		#4 Posted : Thursday, November 6, 2008 1:51:19 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/1/2008(UTC) Posts: 2,429		Normally a drain pipe comes up, 4 feet off the floor. So do what it takes to keep the hose up high enough to stop the syphoning. Tom ApplianceEducator.com
User Profile View All Posts by User View Thanks

flatslide		#5 Posted : Thursday, November 6, 2008 9:09:31 PM(UTC)
Rank: Member Groups: Registered Joined: 11/5/2008(UTC) Posts: 3		Originally Posted by: kayakcrzy Normally a drain pipe comes up, 4 feet off the floor. So do what it takes to keep the hose up high enough to stop the syphoning. Tom ApplianceEducator.com the hose has always been at 4-2". what i am wondering is because the hose is all one piece from the washer to the floor drain is that why it's causing the washer to siphon. what if i was to mount a stack and use a regular style washer hose with a hook end.
User Profile View All Posts by User View Thanks

Gene		#6 Posted : Friday, November 7, 2008 5:40:08 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Just to add my 2 cents... Here are the manufacturer Installation instructionswhere you can find exact instructions on how the drain should be made. Gene.
User Profile View All Posts by User View Thanks

kayakcrzy		#7 Posted : Saturday, November 8, 2008 3:41:38 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/1/2008(UTC) Posts: 2,429		Gene, that is awesome. A picture is worth a thousand words. Your 2 cents is always welcome. Tom ApplianceEducator.com
User Profile View All Posts by User View Thanks

Gene		#8 Posted : Saturday, November 8, 2008 4:14:09 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		My pleasure! Gene.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (5)