Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
weschill  
#1 Posted : Saturday, November 8, 2008 2:00:53 AM(UTC)
weschill

Rank: Member

Groups: Registered
Joined: 11/8/2008(UTC)
Posts: 1

Correct me if I'm wrong, but I believe I need to replace the defrost in the freezer. I need to check the continuity of the defroster first, but I thought I would ask before I take the freezer apart. The tube that runs from the freezer to the drain pan keeps clogging up with ice and causes the water to drip into the fridge. I know their is nothing else clogging that tube, because i have blown it out with an air nozzle several times. Does it sound like I'm on the right track, or am I completely wrong? Any information that you can give me will be greatly appreciated. Thank you!
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
v2k04  
#2 Posted : Saturday, November 8, 2008 2:16:54 AM(UTC)
v2k04

Rank: Advanced Member

Groups: Senior Expert
Joined: 10/9/2008(UTC)
Posts: 784

you need to put a heater in the drain hole.The defrost cycle is working fine otherwise it wouldn't be dripping defrost water inside frig.Thaw it out again making sure it's totally cleared pour hot water down it and verify its going in defrost pan. You can use a wire coat hanger and wrap it around defrost heat and direct it about an inch down the defrost drain hole then the heat will transfer from the defrost heater to the wire keeping the hole cleared
v2k04  
#3 Posted : Saturday, November 8, 2008 2:17:42 AM(UTC)
v2k04

Rank: Advanced Member

Groups: Senior Expert
Joined: 10/9/2008(UTC)
Posts: 784

you need to put a heater in the drain hole.The defrost cycle is working fine otherwise it wouldn't be dripping defrost water inside frig.Thaw it out again making sure it's totally cleared pour hot water down it and verify its going in defrost pan. You can use a wire coat hanger and wrap it around defrost heater and direct it about an inch down the defrost drain hole then the heat will transfer from the defrost heater to the wire keeping the hole cleared.....Sorry for the double post
LocalHero  
#4 Posted : Thursday, May 7, 2009 5:05:19 AM(UTC)
LocalHero

Rank: Member

Groups: Registered
Joined: 5/7/2009(UTC)
Posts: 2

Maybe a copper wire would be better as it wouldnt' rust? I tried this on one of my fridges but it didn't work. However I didn't put it an inch down into the drain line. I'll be over there today to fix it again so I'll re-do it with a longer copper wire and see how that does.
Thanks,
John


Originally Posted by: v2k04 Go to Quoted Post
you need to put a heater in the drain hole.The defrost cycle is working fine otherwise it wouldn't be dripping defrost water inside frig.Thaw it out again making sure it's totally cleared pour hot water down it and verify its going in defrost pan. You can use a wire coat hanger and wrap it around defrost heater and direct it about an inch down the defrost drain hole then the heat will transfer from the defrost heater to the wire keeping the hole cleared.....Sorry for the double post
LocalHero  
#5 Posted : Sunday, May 10, 2009 3:11:35 AM(UTC)
LocalHero

Rank: Member

Groups: Registered
Joined: 5/7/2009(UTC)
Posts: 2

I take it back when I say the wire didn't work. When I took the back panel off the freezer I could see that the first wire I'd put in there had shifted somehow so that it was no longer in the hole. Probably when I'd put the cover on last time.
This time I put a heavy copper wire at least an inch into the hole.

I am curious as to why this would start happening on a fridge as it ages though. Is the heater coil getting less powerful?
Users browsing this topic
Guest (4)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.