New Topic Post Reply

mouse in fan Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: 106.61182100	Brand: Kenmore	Age: 5 - 10 years
Previous Topic Next Topic

vanduzow		#1 Posted : Thursday, October 2, 2008 9:20:30 AM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 10/2/2008(UTC) Posts: 4		My frig was not cooling. Looked in back and saw dead mouse caught in condenser fan. Is the fan shot (how can I find out ?) or do I just need to replace relay, start device and or capacitor?
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

libertyappl		#2 Posted : Thursday, October 2, 2008 9:26:11 AM(UTC) Quote Multi-Quote
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		If your fan isn't running and the compressor is then change the fan motor. Mice can do BAD things to an appliance. Nat
User Profile View All Posts by User View Thanks

vanduzow		#3 Posted : Monday, October 13, 2008 8:22:03 AM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 10/2/2008(UTC) Posts: 4		Changed motor. It now runs , but fridge only cools a little. Now what?
User Profile View All Posts by User View Thanks

libertyappl		#4 Posted : Monday, October 13, 2008 11:58:59 AM(UTC) Quote Multi-Quote
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		Make sure all the coils near the compressor(condenser coils) are clean use a brush & vacuum to clean them. Nat
User Profile View All Posts by User View Thanks

vanduzow		#5 Posted : Monday, November 3, 2008 8:26:40 AM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 10/2/2008(UTC) Posts: 4		Cleaned the coils. Everything runs. Still the unit doesn't get cold enough to freeze water. Could something else have gotten zapped when the mouse clogged the condenser fan? Thanks for your time and expertise
User Profile View All Posts by User View Thanks

libertyappl		#6 Posted : Monday, November 3, 2008 8:36:22 AM(UTC) Quote Multi-Quote
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		Check the fan in the freezer make sure it's running and see if there's a lot of frost or ice buildup on the back of the freezer compartment. it's possible the mouse may have chewed some wires before getting in the condenser fan. Nat
User Profile View All Posts by User View Thanks

vanduzow		#7 Posted : Wednesday, November 5, 2008 3:33:54 PM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 10/2/2008(UTC) Posts: 4		Nat, No ice buildup. Freezer fan is working. Things get cold, just not that cold. Bill
User Profile View All Posts by User View Thanks

libertyappl		#8 Posted : Thursday, November 6, 2008 8:06:58 AM(UTC) Quote Multi-Quote
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		The mouse stopping the fan may ave overheated the compressor and weakened it. Nat
User Profile View All Posts by User View Thanks

Quick Reply Show Quick Reply Security Image: Enter The Letters From The Security Image:

Users browsing this topic

New Topic Post Reply