Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Side by Side too warm
Options
Go to last post Go to first unread
Model: FRS26R2AQ5 Brand: Frigidaire Age: 5 - 10 years
Previous Topic Next Topic
kam  
#1 Posted : Monday, October 27, 2008 7:16:42 PM(UTC)
kam

Rank: Member

Groups: Registered
Joined: 10/27/2008(UTC)
Posts: 4
Both Fridge and Freezer are not cold enough even though on coldest setting. Condenser coils and fan are clean. When I took lower backing off, Condenser fan was running, but stopped after a bit. Compressor is very warm to the touch. What else can I look for to troubleshoot?

Thanks!
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
libertyappl  
#2 Posted : Monday, October 27, 2008 7:23:37 PM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
Was the compressor running when the condensor fan wasn't?
Is there ice build up on the rear panel in the freezer?
Nat
Back to top
kam  
#3 Posted : Monday, October 27, 2008 7:26:28 PM(UTC)
kam

Rank: Member

Groups: Registered
Joined: 10/27/2008(UTC)
Posts: 4
How can I tell if the compressor is running? There is no ice build up.
Back to top
libertyappl  
#4 Posted : Monday, October 27, 2008 7:32:05 PM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
The compressor will vibrate when running. An easy test is use a long screw driver like a stethoscope.
Nat
Back to top
kam  
#5 Posted : Monday, October 27, 2008 7:45:34 PM(UTC)
kam

Rank: Member

Groups: Registered
Joined: 10/27/2008(UTC)
Posts: 4
Compressor does not seem to be running. If it needs a new compressor, is it worth fixing?
Back to top
libertyappl  
#6 Posted : Tuesday, October 28, 2008 5:42:23 AM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
If the compressor isn't running you will want to check the start device/relay overload & the capacitor. If you can remove the start device, shak it if it rattles it's bad, replace those parts. Paying approximately $500 for a compressor swap is a lot cheaper than a new side by side. If the compressor is bad. If in doubt call a appliance technician.
Nat
Back to top
kam  
#7 Posted : Sunday, November 9, 2008 8:41:15 PM(UTC)
kam

Rank: Member

Groups: Registered
Joined: 10/27/2008(UTC)
Posts: 4
Thank you for the info you gave me! I had a tech come out and he said that compressor is going out. Ordered one online and had friend that is a tech install. Question is how much refridgerent (sp?) do we put in? The sticker says charge 5.25 oz. That can't refer to the amount used, can it? Does seem like that would be enough. Any thoughts?
Back to top
libertyappl  
#8 Posted : Monday, November 10, 2008 4:52:19 AM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
That's exactly how much to use. Don't use any more than that or it will urn out the compressor again. Your friend should have a scale to weigh how much he is putting in.

Nat
Back to top
Users browsing this topic
Guest (6)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET