Dishwasher stopped working mid-cycle, no lights working. - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Dishwasher stopped working mid-cycle, no lights working. Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: KUDC03ITBL3	Brand: Kitchen Aid	Age: 1 - 5 years
Previous Topic Next Topic

natecobbs		#1 Posted : Saturday, March 19, 2011 4:04:52 PM(UTC)
Rank: Member Groups: Registered Joined: 3/19/2011(UTC) Posts: 3		My dishwasher stopped working mid-cycle. There is still water sitting in it but the control panel does not work, none of the lights work. I checked behind the kick-plate and opened the front panel but nothing looks fried. What should I try next?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

jamh		#2 Posted : Saturday, March 19, 2011 5:54:26 PM(UTC)
Rank: Member Groups: Registered Joined: 3/8/2011(UTC) Posts: 31		Chk your bimetal at the control. Turn the power off and chk with multi meter should be closed. You can also use a jumper wire across each post and turn power back on and see if you have lights. If so replace bimetal. # 6 under control parts.


User Profile View All Posts by User View Thanks

natecobbs		#3 Posted : Sunday, March 20, 2011 10:18:24 AM(UTC)
Rank: Member Groups: Registered Joined: 3/19/2011(UTC) Posts: 3		Thank you for your help. I ran a wire and now the lights are working. Do I need to dertermine why the fuse failed? I have ordered a new one but I just want to make sure the same problem does not cause this one to fail also. Thank you again for your help. Nate


User Profile View All Posts by User View Thanks

jamh		#4 Posted : Sunday, March 20, 2011 10:40:56 AM(UTC)
Rank: Member Groups: Registered Joined: 3/8/2011(UTC) Posts: 31		The fuse is a safety device, you coud of had a surge of power, its really hard to know, if it keeps happening after replacement you may want to chk power supply. I have never had problems after replacing it.


User Profile View All Posts by User View Thanks

natecobbs		#5 Posted : Sunday, March 20, 2011 10:48:01 AM(UTC)
Rank: Member Groups: Registered Joined: 3/19/2011(UTC) Posts: 3		Sounds good. Thank you for all your help!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (5)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close