Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
DW Repair
Options
Go to last post Go to first unread
Model: FDB1050RES0 Brand: Frigidaire Age: 5 - 10 years
Previous Topic Next Topic
Sumold  
#1 Posted : Friday, March 18, 2011 12:38:13 PM(UTC)
Sumold

Rank: Member

Groups: Registered
Joined: 3/18/2011(UTC)
Posts: 5
Found puddle on floor after dishwashing. Removed front cover near floor on front of DW. Water dripping from center of unit. What am I getting into if I want to do the repair?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Saturday, March 19, 2011 3:44:16 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Replacement parts for FRIGIDAIRE FDB1050RES0 Frigidaire/dishwasher | AppliancePartsPros.com

Here is a manual which should help with the repair or at least help you decide if you want to tackle it.
http://frigidaireservicetips.com/pdfs/462_8.pdf

First you have to find out where the actual leak is.
A good flashlight and a small mirror come in handy here. An ideal mirror is the type mechanics etc. use, it is a mirror mounted on an expendable handle.
You could attach a small mirror to a piece of doweling.
Often where it is dripping from is not where the actual leak is.
THIS FORUM IS DEAD!!!!!!!
Back to top
Sumold  
#3 Posted : Saturday, March 19, 2011 4:00:07 AM(UTC)
Sumold

Rank: Member

Groups: Registered
Joined: 3/18/2011(UTC)
Posts: 5
Thanx Denman for the links. Will ck things out.
Back to top
Sumold  
#4 Posted : Saturday, March 19, 2011 9:13:17 AM(UTC)
Sumold

Rank: Member

Groups: Registered
Joined: 3/18/2011(UTC)
Posts: 5
Hi Denman!!! Did the deed!!! Removed DW from undercounter. Noticed that the motor bracket was rusted. Removed 2 screws and took off the bracket. Was able to pull by hand the motor exposing the 2 O rings. Both rings were very flat looking. I found no other areas on the bottom of the DW that looked like they had a leak or had been leaking. What do you think???

Questions- if I replace the rings will I just have to follow the process described above in reverse? Or will it be a more pressue type fit because the rings are new? If so do I need some type of lubercation?
Back to top
denman  
#5 Posted : Saturday, March 19, 2011 9:48:25 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
[COLOR="DarkRed"]What do you think???[/COLOR]
Sounds like you found it

[COLOR="DarkRed"]Questions- if I replace the rings will I just have to follow the process described above in reverse? Or will it be a more pressue type fit because the rings are new?[/COLOR]
Yes to both but should not be a huge problem.

[COLOR="DarkRed"]If so do I need some type of lubercation?[/COLOR]
I always put a light coating of grease on O-rings, seals etc, when doing any plumbing. They go in easier and have less tendency to grab and twist. Also when I have to take it apart 5 years from now it is easier as the scale does not stick to them. I use white lithium grease as it has good temperature resistance and is white so I do not get all dirty but just about any grease will do. Margarine works in a pinch.
Clean where they fit into and also give that area a light coating.
THIS FORUM IS DEAD!!!!!!!
Back to top
Sumold  
#6 Posted : Saturday, March 19, 2011 11:26:28 AM(UTC)
Sumold

Rank: Member

Groups: Registered
Joined: 3/18/2011(UTC)
Posts: 5
Hi!!! I will order the rings. Luv white lithium me ownself!! Upon arrival, I will lube things up, replace the parts and reinstall the DW. Thank you for your good resources and assistance.:D
Back to top
denman  
#7 Posted : Sunday, March 20, 2011 3:33:26 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Good luck with it.

Since you have to pull it apart you might as well open the pump up and clean/check it.
THIS FORUM IS DEAD!!!!!!!
Back to top
Sumold  
#8 Posted : Thursday, March 31, 2011 4:11:53 AM(UTC)
Sumold

Rank: Member

Groups: Registered
Joined: 3/18/2011(UTC)
Posts: 5
All went well with the reinstall after I replaced the rings. Per your suggestion I ck'd the pump and did find debris. Again, thank you for your input and helpful links!!!!:D
Back to top
Users browsing this topic
Guest (4)
Similar Topics
dw repair (Dishwasher Repair)
by tompatriot45 11/14/2013 6:42:32 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET