Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Dryer Quit mid cycle
Options
Go to last post Go to first unread
Model: FDE336RES1 Brand: Frigidaire Age: 1 - 5 years
Previous Topic Next Topic
daleevr  
#1 Posted : Saturday, October 11, 2008 6:57:40 AM(UTC)
daleevr

Rank: Member

Groups: Registered
Joined: 10/11/2008(UTC)
Posts: 1
Our dryer was drying just fine then quit mid cycle for no reason. When I checked it was in the middle or so of its cycle and would not re-start. I have checked the door switch. power coming in, power at the timer, though I do not know if power is in the proper place on the timer at the proper time, starting button, heating element. All this checks ok.

Any help would be greatly appreciated!

Dale
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
libertyappl  
#2 Posted : Saturday, October 11, 2008 7:26:31 AM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
Check the safety thermostat on the heater housing for continuity.
Nat
Back to top
dcheeks30  
#3 Posted : Monday, October 13, 2008 6:47:00 AM(UTC)
dcheeks30

Rank: Member

Groups: Registered
Joined: 10/13/2008(UTC)
Posts: 2
where can I find this at?
Back to top
libertyappl  
#4 Posted : Monday, October 13, 2008 12:03:15 PM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
Remove the rear panel on the dryer and locate the heater box, you will see the thermostat at the wire connections. Remove one set of wires at a time and test the thermostat for continuity.
Nat
Back to top
Drags1998  
#5 Posted : Monday, October 13, 2008 2:55:41 PM(UTC)
Drags1998

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/7/2008(UTC)
Posts: 750
I do believe that you need a #36 thermal limit, This is accessable from the TOP of the dryer, lift the top and look on the heater, It will be on the right side near the top of the heater can. You can test it by connecting the 2 wires together and taping them up. This is ONLY for testing, If it runs, order the part and replace it ASAP, Also, check the VENT HOSE!!!:)
Back to top
Users browsing this topic
Guest (5)
Similar Topics
dryer quit mid cycle (Dryer Repair)
by heavydutyjp1 11/11/2013 10:50:36 AM(UTC)
dryer quit mid cycle and will not restart (Dryer Repair)
by canadian 8/12/2008 12:43:33 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET