washer will not spin out all the water in the last spin Options  Emails a topic  Watch this topic  Print this topic » Normal Threaded
Model: 23832100	Brand: Kenmore	Age: 5 - 10 years
Previous Topic Next Topic

myesshowme		#1 Posted : Saturday, October 11, 2008 1:11:00 PM(UTC)
Rank: Member Groups: Registered Joined: 10/11/2008(UTC) Posts: 2		What part do I need to Buy for my Kenmore washer 80 series Heavy Duty . My washer will not spin all of the water in the last spin. Is it the brake
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

v2k04		#2 Posted : Saturday, October 11, 2008 1:41:40 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 10/9/2008(UTC) Posts: 784		it may be the clutch a worn clutch will keep the machine from getting up to full speed aqlmost like it is in low gear
User Profile View All Posts by User View Thanks

Drags1998		#3 Posted : Saturday, October 11, 2008 5:06:15 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/7/2008(UTC) Posts: 750		Check for a KINKED drain hose first, if its OK, check the spin speed. if its slow, replace the CLUTCH.
User Profile View All Posts by User View Thanks

richappy		#4 Posted : Sunday, October 12, 2008 8:56:07 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		If you have bad brake shoes, a new clutch will wear out soon, unless the motor burns out first! Crunch into the search window, "replacing direct drive brake shoes", If it fails the test with the tranny coupler, you have bad brake shoes.
User Profile View All Posts by User View Thanks

Drags1998		#5 Posted : Sunday, October 12, 2008 9:23:19 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/7/2008(UTC) Posts: 750		Richappy is correct, HOWEVER, I have been working on these washers since they were introduced in 1981. I have NEVER had to replace "Brake Shoes" I think you will find that replacing the clutch will take care of your problem. Have a great day!!!!:)
User Profile View All Posts by User View Thanks

richappy		#6 Posted : Sunday, October 12, 2008 10:35:34 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		I also have been fixing these since then and recently have seen a lot of the "newer" ones with really BAD problems with dragging brake shoes. I have seen motors burn out or motor epoxy failures jamming the bearings. The brake shoe rollers wear out because they now never oil them in production!!
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (3)

Similar Topics

washer will not spin out all the water in the last spin (Washer Repair) by myesshowme 10/11/2008 1:07:03 PM(UTC)