Kemore Elite - Replaced Emitter and Receiver Boards - Next? Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
	Brand: -brand-	Age: Less than 1 year
Previous Topic Next Topic

marncrump		#1 Posted : Tuesday, October 7, 2008 8:06:02 AM(UTC)
Rank: Member Groups: Registered Joined: 10/7/2008(UTC) Posts: 5		I recently replaced both boards and now my LCD lights (using diagnostic) is working. Do I have to do anything to reset the icemaker.... if not, when will the icemaker begin producing ice again?
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

libertyappl		#2 Posted : Tuesday, October 7, 2008 9:52:38 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		Is the icemaker getting water into it? Please post your model number. Nat
User Profile View All Posts by User View Thanks

marncrump		#3 Posted : Tuesday, October 7, 2008 11:14:15 AM(UTC)
Rank: Member Groups: Registered Joined: 10/7/2008(UTC) Posts: 5		Thanks, initially a little water did go in - not full all the way.... It is a Kenmore Elite 10652602100. Thanks for any help you can give.
User Profile View All Posts by User View Thanks

libertyappl		#4 Posted : Tuesday, October 7, 2008 11:41:58 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		lets switch the electrical leads on the water valve, located on the back of the unit. Then push the water dispenser lever and see if you get water into the icemaker. Nat
User Profile View All Posts by User View Thanks

marncrump		#5 Posted : Tuesday, October 7, 2008 12:13:17 PM(UTC)
Rank: Member Groups: Registered Joined: 10/7/2008(UTC) Posts: 5		if that works, what's the problem? I've never switched the electrical leads -- is this difficult.
User Profile View All Posts by User View Thanks

libertyappl		#6 Posted : Tuesday, October 7, 2008 12:52:50 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		Switching the leads is easy. If you get water in the icemaker then it's the icemaker motor module it'se (cheaper to get a whole new IM) if you don't then the valve is not working properly. Nat
User Profile View All Posts by User View Thanks

marncrump		#7 Posted : Tuesday, October 7, 2008 2:15:15 PM(UTC)
Rank: Member Groups: Registered Joined: 10/7/2008(UTC) Posts: 5		I can't find a diagram of the water valve to determine location of leads - I know that's pitiful... can you give me some guidance...
User Profile View All Posts by User View Thanks

marncrump		#8 Posted : Tuesday, October 7, 2008 2:16:06 PM(UTC)
Rank: Member Groups: Registered Joined: 10/7/2008(UTC) Posts: 5		Also, my husband and I are pastors at a church in Atlanta.
User Profile View All Posts by User View Thanks

libertyappl		#9 Posted : Tuesday, October 7, 2008 2:55:06 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		You can look at the breakdown on searspartsdirect. The valve is on the back rear of the machine, behind the lower panel. just pull the wires off and switch places with them. Glad to hear you are in the ministry, Praise God! We do the jail house ministry on our own we're not affiliated with a denominational church. Natalie
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (5)