Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Dishwasher not draining
Options
Go to last post Go to first unread
Model: DW906B Brand: Jenn-Air Age: More than 10 years
Previous Topic Next Topic
scott3151  
#1 Posted : Thursday, October 2, 2008 2:15:26 PM(UTC)
scott3151

Rank: Member

Groups: Registered
Joined: 9/23/2008(UTC)
Posts: 3
I have our dishwasher tore down to the pump volute and am trying to figure out how to take out the shaft that the chopper blade is attached to. I can't lift out the volute vertically untill the shaft is removed, any ideas. I thought there might be an obstrucktion underneath. The air gap is clear, no water at all in tube when washer put on drain cycle.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Friday, October 3, 2008 12:16:22 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
The model number you posted does not come up. It might be due to age of the dishwasher or if it's not an American model.

Gene.
Back to top
ggg  
#3 Posted : Friday, October 3, 2008 12:34:04 PM(UTC)
ggg

Rank: Member

Groups: Registered
Joined: 10/3/2008(UTC)
Posts: 1
I am getting a F1 code , the first error message was f3 the first time I unplugged and plugged back in and now Im getting F1 error. I got the code to clear off and then it was good over night and now its doing it again and its 3 pm Can you help me with my problem the panel is Black on my stove Thanks
Back to top
Gene  
#4 Posted : Friday, October 3, 2008 12:49:00 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
The first thing I would do is check resistance of the oven temperature probe.

The oven temperature probe


UserPostedImage


It suppose to be about 1100 Ohms at the room temperature.

If the reading is wrong then replace the oven temperature probe.

If the reading is correct then replace the Electronic Oven Control (EOC).

- The part number for the oven temperature probe is AP3363354

- The part number for the EOC is AP3677078

Gene.
Back to top
scott3151  
#5 Posted : Friday, October 3, 2008 1:05:33 PM(UTC)
scott3151

Rank: Member

Groups: Registered
Joined: 9/23/2008(UTC)
Posts: 3
Thanks for replying, however, I did find a detailed view and parts list on this web site for the DW 960 B model. Jenn-Air
Back to top
Gene  
#6 Posted : Friday, October 3, 2008 1:17:11 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You posted DW906B.

Gene.
Back to top
Users browsing this topic
Guest (3)
Similar Topics
DCS (Fisher & Paykel) DD24DV2T7 Two Drawer Dishwasher Not Draining Fully (Dishwasher Repair)
by DCBUS 4/7/2023 5:44:37 AM(UTC)
Inglis dishwasher not draining - trouble removing filter (Dishwasher Repair)
by Guest 2/18/2023 5:24:29 AM(UTC)
Dishwasher not Draining - Frigidaire (Dishwasher Repair)
by Guest 12/10/2022 3:04:30 PM(UTC)
Whirlpool Dishwasher not draining at end of cycle-intermittently (Dishwasher Repair)
by Floyd Pinkerton 9/28/2022 11:07:32 AM(UTC)
Whirlpool dishwasher not draining with diagnostics code 6-4 (Dishwasher Repair)
by dcelbert 12/28/2021 11:04:45 AM(UTC)
GE Dishwasher not draining, no clogs anywhere (Dishwasher Repair)
by DanielWS 9/16/2020 11:32:15 AM(UTC)
Dishwasher not draining fully (Dishwasher Repair)
by ernestcmjr 1/29/2016 12:51:58 PM(UTC)
Kitchenaid dishwasher not draining... (Dishwasher Repair)
by mjl1297 1/19/2016 7:03:55 PM(UTC)
Whirlpool dishwasher not draining (model WDF730PAYB6) (Dishwasher Repair)
by patrick04 12/20/2015 7:40:06 PM(UTC)
Kitchen Aid Dishwasher Not Draining (Dishwasher Repair)
by jrdardano 7/18/2015 1:23:21 PM(UTC)
Dishwasher not draining after cycle (Dishwasher Repair)
by sanjayg1971 7/1/2015 10:37:25 AM(UTC)
Dishwasher not draining (Dishwasher Repair)
by CTLewis 2/23/2014 1:43:26 PM(UTC)
Amana dishwasher not draining completely (Dishwasher Repair)
by dennis728 11/24/2013 4:26:15 PM(UTC)
whirlpool dishwasher not draining (Dishwasher Repair)
by mdauer2002 5/28/2013 1:28:01 PM(UTC)
Dishwasher not draining, hoses/filter are clear (Dishwasher Repair)
by limon 3/1/2013 8:37:12 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET