Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
2 Pages12>
It is agitating
Options
Go to last post Go to first unread
Brand: Kitchen Aid Age: More than 10 years
Previous Topic Next Topic
ReuSam  
#1 Posted : Thursday, February 17, 2011 9:54:28 AM(UTC)
ReuSam

Rank: Member

Groups: Registered
Joined: 2/17/2011(UTC)
Posts: 12
Kitchen Aid washer agitates normally, BUT on spin mode, it agitates faster causing the washer to partially drain. it goes thru the cycle.

Need help. Thanx...
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Joe / APP Team  
#2 Posted : Thursday, February 17, 2011 11:33:15 AM(UTC)
Joe / APP Team

Rank: Advanced Member

Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: ReuSam Go to Quoted Post
Kitchen Aid washer agitates normally, BUT on spin mode, it agitates faster causing the washer to partially drain. it goes thru the cycle.

Need help. Thanx...


Based on your post,

We're going to need a model number off the machine, to properly assist you.

Thanks,
:) :) :)
Back to top
ReuSam  
#3 Posted : Friday, February 18, 2011 8:17:18 AM(UTC)
ReuSam

Rank: Member

Groups: Registered
Joined: 2/17/2011(UTC)
Posts: 12
Can't find plate/tag butpanel shows Supra...
Back to top
Joe / APP Team  
#4 Posted : Friday, February 18, 2011 2:07:00 PM(UTC)
Joe / APP Team

Rank: Advanced Member

Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: ReuSam Go to Quoted Post
Can't find plate/tag butpanel shows Supra...



Reu,

Not quite enough information.

How old is the machine, if you know ?

I'm trying to determine if the washer is an older belt drive system,

or a newer direct drive system(most likely).

If the unit is a direct drive unit, you'll most likely have a bad gearcase/transmission.

If you can get to the back of the machine, and see if there is a removable panel, that would help get us on track better.

:) :) :)
Back to top
John0818  
#5 Posted : Friday, February 18, 2011 3:11:03 PM(UTC)
John0818

Rank: Member

Groups: Registered
Joined: 2/18/2011(UTC)
Posts: 2
no it will not spin or drain
Back to top
ReuSam  
#6 Posted : Friday, February 18, 2011 5:02:56 PM(UTC)
ReuSam

Rank: Member

Groups: Registered
Joined: 2/17/2011(UTC)
Posts: 12
Originally Posted by: Joe / APP Team Go to Quoted Post
Based on your post,

We're going to need a model number off the machine, to properly assist you.

Thanks,
:) :) :)

It is a direct drive transmission. I checked the transmission for any debris and found none then carefully reassembled. I separated the transmission and the motor and found a broken coupling. I replaced coupling and restarted machine. It goes thru the cycle, fills water, agitates and when on spin mode, it agitates faster draining water partially. Can't find tag anywhere. The washer is about ten years old. The only information I can see is on the control panel where it say Supra. Thanx
Back to top
ReuSam  
#7 Posted : Saturday, February 19, 2011 2:08:59 PM(UTC)
ReuSam

Rank: Member

Groups: Registered
Joined: 2/17/2011(UTC)
Posts: 12
Originally Posted by: ReuSam Go to Quoted Post
It is a direct drive transmission. I checked the transmission for any debris and found none then carefully reassembled. I separated the transmission and the motor and found a broken coupling. I replaced coupling and restarted machine. It goes thru the cycle, fills water, agitates and when on spin mode, it agitates faster draining water partially. Can't find tag anywhere. The washer is about ten years old. The only information I can see is on the control panel where it say Supra. Thanx



I finally found the tag burried behind the lid. Mod.# KAWS850JQ0.
Also, the model name is Superba instead of Supra.
Back to top
ReuSam  
#8 Posted : Saturday, February 19, 2011 2:10:42 PM(UTC)
ReuSam

Rank: Member

Groups: Registered
Joined: 2/17/2011(UTC)
Posts: 12
Originally Posted by: ReuSam Go to Quoted Post
Can't find plate/tag butpanel shows Supra...




Finally, the Model No. KAWS850JQ0, model name Superba not Supra.
Back to top
ReuSam  
#9 Posted : Saturday, February 19, 2011 3:57:15 PM(UTC)
ReuSam

Rank: Member

Groups: Registered
Joined: 2/17/2011(UTC)
Posts: 12
Originally Posted by: Joe / APP Team Go to Quoted Post
Based on your post,

We're going to need a model number off the machine, to properly assist you.

Thanks,
:) :) :)



Model No. KAWS850JQO, Model Name Superba NOT Supra.
Back to top
Joe / APP Team  
#10 Posted : Monday, February 21, 2011 6:20:32 AM(UTC)
Joe / APP Team

Rank: Advanced Member

Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: ReuSam Go to Quoted Post
Model No. KAWS850JQO, Model Name Superba NOT Supra.



REU,

Thanks for the update,

And the extra effort, makes things a lot easier.


Part number: AP3096209
Part number: AP3096209


Unfortunately,
It sure sounds like you most likely have a bad gearcase/ transmission.

The shift actuator and or cam are damaged, these components are interior parts in the gearcase, and can't be replaced(per the manufacturer).

And of course you'll need the coupler assembly.

Part number: AP3963893
Part number: AP3963893


It sounds a lot worse than it is, it'll usually take about 60 minutes for a DIY'r to do.

Let us know, and we'll get you some more information on how to.

Good Luck,

Thanks Again,
:) :) :)
Back to top
Users browsing this topic
Guest (2)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET