Rank: Member
Groups: Registered
Joined: 2/17/2011(UTC)
Posts: 12
|
Thank you for your effort and information.
Costwise, I'll be better of buying an inexpensive washer.
Reusam
|
|
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: ReuSam  Thank you for your effort and information.
Costwise, I'll be better of buying an inexpensive washer.
Reusam Reu, You're welcome, It was a pleasure to help. Should you change your mind, we'll be here to help. Good Luck, :) :) :)
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/17/2011(UTC)
Posts: 12
|
Joe,
I thought of dropping you a line to let you know that I had the washer working about two weeks after our last conversation. Initially,when I inspected for any obstruction inside the tranny (none found), #26 on the diagram, the plastic and metal clip came off gear # 25. When I put them together, I put the plastic with an "UP" marking side towards #25 (as if the whole unit in upright position). I downloaded the gearcase assembly drawing and noted that #25 should have been flipped over which I did.
Lo and behold the washer is working properly again.
Hopefully this information might help down the road.
ReuSam
|
|
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: ReuSam Joe,
I thought of dropping you a line to let you know that I had the washer working about two weeks after our last conversation. Initially,when I inspected for any obstruction inside the tranny (none found), #26 on the diagram, the plastic and metal clip came off gear # 25. When I put them together, I put the plastic with an "UP" marking side towards #25 (as if the whole unit in upright position). I downloaded the gearcase assembly drawing and noted that #25 should have been flipped over which I did.
Lo and behold the washer is working properly again.
Hopefully this information might help down the road.
ReuSam ReuSam, Thanks for the update, it'll come in handy, for sure. We're glad you're up and running properly again. Thanks again and Good Luck, :D :D :D
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
