Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
quonsetguy  
#1 Posted : Wednesday, September 17, 2008 10:00:58 PM(UTC)
quonsetguy

Rank: Member

Groups: Registered
Joined: 9/17/2008(UTC)
Posts: 1

ive pulled the unit out from under the cabinet and run a load thru it, and trace the leaking to the left side where the rubber hose from the inlet valve goes into the side of the washer. it is not leaking at the hose connection but from behind some sort square baffle looking thing. it just kind of burps out water a little at a time and eventually stops , but not before leaving quite a little puddle. any ideas?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Thursday, September 18, 2008 2:29:44 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Possible there is an excessive pressure in the water line. Try to close the water shut off valve a little bit.

Here are the break down diagrams for the Caloric dishwasher Model CDU600CWW

Gene.
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.