2 Pages12> Go to Page...

Oven not going past 180 in temp Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
	Brand: Maytag	Age: 1 - 5 years
Previous Topic Next Topic

lilbits		#1 Posted : Tuesday, September 16, 2008 4:08:21 PM(UTC)
Rank: Member Groups: Registered Joined: 9/16/2008(UTC) Posts: 6		Hello my oven is not working properly. It will not go pass 180 in temp. I can set it on 350 to cook and it will take all day to get there and most of the time not make it what can be wrong with it? I need help. My sister tried cooking Sunday's dinner and we put the oven on at 11:00 and around 2:00 it was only on 185 I really need help. Lilbits
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Drags1998		#2 Posted : Tuesday, September 16, 2008 4:27:46 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/7/2008(UTC) Posts: 750		I would turn it to BAKE, Wait a few seconds and CAREFULLY check the Bottom element in the oven,Is it HOT??? if not,either the element is bad, the thermostat is bad, or you have wiring problems. I'll bet the element has failed!!!!:)
User Profile View All Posts by User View Thanks

lilbits		#3 Posted : Tuesday, September 16, 2008 7:15:47 PM(UTC)
Rank: Member Groups: Registered Joined: 9/16/2008(UTC) Posts: 6		I do put it on bake. And how do I fix that part your talking about? lilbits
User Profile View All Posts by User View Thanks

libertyappl		#4 Posted : Tuesday, September 16, 2008 7:26:07 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		Please post your model number so we can look at your unit. nat
User Profile View All Posts by User View Thanks

lilbits		#5 Posted : Wednesday, September 17, 2008 6:46:53 AM(UTC)
Rank: Member Groups: Registered Joined: 9/16/2008(UTC) Posts: 6		my model number is MGR5751BDB
User Profile View All Posts by User View Thanks

libertyappl		#6 Posted : Wednesday, September 17, 2008 6:56:38 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		Check your gas burner and check the ignitor see if it glows. I'd bet on the ignitor! Part number AP3455359. Nat
User Profile View All Posts by User View Thanks

lilbits		#7 Posted : Wednesday, September 17, 2008 6:42:49 PM(UTC)
Rank: Member Groups: Registered Joined: 9/16/2008(UTC) Posts: 6		Do you know of anyone that can fix it for me if I get the part that it need?
User Profile View All Posts by User View Thanks

libertyappl		#8 Posted : Wednesday, September 17, 2008 6:43:51 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		Where are you located?
User Profile View All Posts by User View Thanks

lilbits		#9 Posted : Wednesday, September 17, 2008 6:44:08 PM(UTC)
Rank: Member Groups: Registered Joined: 9/16/2008(UTC) Posts: 6		Also one side glows the other side don't.
User Profile View All Posts by User View Thanks

lilbits		#10 Posted : Wednesday, September 17, 2008 6:47:03 PM(UTC)
Rank: Member Groups: Registered Joined: 9/16/2008(UTC) Posts: 6		In Philadelphia PA
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (4)

2 Pages12> Go to Page...