Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Front loader washer will not spin or agitate
Options
Go to last post Go to first unread
Model: FWT647GHS1 Brand: Frigidaire Age: Less than 1 year
Previous Topic Next Topic
crazymomor  
#1 Posted : Thursday, September 11, 2008 9:57:03 PM(UTC)
crazymomor

Rank: Member

Groups: Registered
Joined: 9/11/2008(UTC)
Posts: 3
Washer stopped spinning. Checked agitation not working either. Washer fills and drains fine. Took back off, found shock struck broken. Replaced both. Still not working. Called support line, they indicated the speed control board. Called repair person he thought so as well. I ordered part installed it still nothing. What next? The timer or the motor? HELP HELP HELP. Need washer back in service fast.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
richappy  
#2 Posted : Friday, September 12, 2008 1:09:11 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Pull the front kick panel and check the service sheet. You will find a diagnostic test for this problem, may be a bad door switch.
Back to top
crazymomor  
#3 Posted : Friday, September 12, 2008 4:09:21 PM(UTC)
crazymomor

Rank: Member

Groups: Registered
Joined: 9/11/2008(UTC)
Posts: 3
Do you have a link for the repair manuals for this. I am looking for the motor thermal cut out. I ran the Tests from teh sheet and there is no voltage change so it indicates look at teh moter thermal cut out. Where is it.
Back to top
Gene  
#4 Posted : Friday, September 12, 2008 4:22:23 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: crazymomor Go to Quoted Post
...I am looking for the motor thermal cut out... Where is it...


This is a part of the motor and you have to order the whole new motor to fix the problem.

- The part number for the motor assembly is AP2107525

Here are the break down diagrams for the Frigidaire washer Model FWT647GHS1

Gene.
Back to top
crazymomor  
#5 Posted : Friday, September 12, 2008 7:31:33 PM(UTC)
crazymomor

Rank: Member

Groups: Registered
Joined: 9/11/2008(UTC)
Posts: 3
Thanks for the information. I found that my volt meater was not working correctly. I found a wire that was rubbed and shorted on the chasie. It goes directy to the door switch. I am hoping that is it. I have an old door switch that just had a broken plastic part in it I am going to try to piece it together.
Back to top
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET