Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
GE timer control
Options
Go to last post Go to first unread
Model: JBP65GV2WH Brand: GE Age: 1 - 5 years
Previous Topic Next Topic
watelec  
#1 Posted : Monday, January 24, 2011 5:44:37 AM(UTC)
watelec

Rank: Member

Groups: Registered
Joined: 1/24/2011(UTC)
Posts: 1
I have replaced my control with part # WB27X10215. The original part # was WB27X5562 which is no longer available. The sensor and door latch plugs are not exactly alike. the original plug is numbered 12312. 123 is the door latch an 12 is the temp sensor. the new plug is numbered 12345. Does the temp sensor attach to 4 and 5? I'm getting an F4 error code now but the sensor reads 15 ohms at room temp and is not grounded to the frame.

Thanks
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Joe / APP Team  
#2 Posted : Tuesday, January 25, 2011 6:32:04 AM(UTC)
Joe / APP Team

Rank: Advanced Member

Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: watelec Go to Quoted Post
I have replaced my control with part # WB27X10215. The original part # was WB27X5562 which is no longer available. The sensor and door latch plugs are not exactly alike. the original plug is numbered 12312. 123 is the door latch an 12 is the temp sensor. the new plug is numbered 12345. Does the temp sensor attach to 4 and 5? I'm getting an F4 error code now but the sensor reads 15 ohms at room temp and is not grounded to the frame.

Thanks


Watelec,

First off,

Based on my information, the resistance on your sensor is High, you should be reading 10.5 to 11 ohms at room temperature.

At 15 ohms, the sensor is telling the control, it's approximately 300 dgrs in the oven.

As for wiring your replacement clock,

It's going to be "tricky", of course it shouldn't be done, but I understand.

It would be interesting to assist you, but I don't have access to the needed diagrams, etc.

Hopefully, someone on the Repair Forum will have the information needed and can assist.

Good Luck,
:) :) :)
Back to top
Users browsing this topic
Guest (3)
Similar Topics
Whirlpool Range Timer Control 9751345 burnt (Oven Repair (including Ranges and Cooktops))
by tailor 1/24/2011 7:21:00 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET