Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Turbocool light wont shut off
Options
Go to last post Go to first unread
Model: PSS26LGSC WW Brand: GE Age: 1 - 5 years
Previous Topic Next Topic
Scott Taylor  
#1 Posted : Wednesday, September 3, 2008 12:41:18 PM(UTC)
Scott Taylor

Rank: Member

Groups: Registered
Joined: 9/3/2008(UTC)
Posts: 4
Last week I noticed water leaking from the auto ice bucket, ice was melting inside. I removed all food trays from freezer and there was sheet of ice along the left side and back walls. I removed the back panel and defrosted the condensor coils and removed all the ice. After plugging back in the turbocool light came on and the fridge and freezer seem to be working fine. If I push the turbocool the fan kicks in, if I push it again it changes from bright green to slightly dimmer green but I am able to change the temp. settings. What could be the problem?

Thanks for your help,

Scott
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
abadfish66  
#2 Posted : Wednesday, September 3, 2008 1:17:15 PM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620
Can you give me your serial#
Back to top
Scott Taylor  
#3 Posted : Wednesday, September 3, 2008 5:45:48 PM(UTC)
Scott Taylor

Rank: Member

Groups: Registered
Joined: 9/3/2008(UTC)
Posts: 4
S/N # al401425
Back to top
abadfish66  
#4 Posted : Wednesday, September 3, 2008 7:24:18 PM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620
Back to top
abadfish66  
#5 Posted : Wednesday, September 3, 2008 7:25:49 PM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620
It is located at the back of the refer, behind an access panel. Real easy to replace.
Back to top
Scott Taylor  
#6 Posted : Thursday, September 4, 2008 6:09:23 AM(UTC)
Scott Taylor

Rank: Member

Groups: Registered
Joined: 9/3/2008(UTC)
Posts: 4
Thank you so much for the quick replies, GE website said they appreciated the fact I wanted to repair it myself but a ohm meter was required and I needed to call certified GE tech. I'm an ex navy gyro tech, I'll break out the o-scope if needed! I read some other forums regarding this board, does my s/n fall under category of free replacement? Where can I purchase the board?

Thanks so much again,
Scott
Back to top
abadfish66  
#7 Posted : Thursday, September 4, 2008 6:14:17 AM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620
You can purchase the board here, I checked, and your refer does not fall under the category for a free repair. I just had a customer with the same problem as you yesterday. I charged $269 for the repair that you can do for $95 by purchasing the part here------->Part Details - GE Main board assembly, part number: WR55X10552
Back to top
Users browsing this topic
Guest (4)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET