Rank: Member
Groups: Registered
Joined: 5/14/2008(UTC)
Posts: 1
|
I have the range listed above. The other night my wife was pre-heating the oven to use. All of a sudden, it popped, and the bottom element was burning into 2 pieces and was flaming. I turned the breaker off and the flame went out. I have a new element ordered. Tonight I removed the defective element and turned the breaker on. The light came on in the oven, the 2 right burners came on, on the stove top. The electronic display never came on. The left top burners would not come on either. Does anyone have any ideas?
Thanks
Dawiz
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 7/24/2007(UTC)
Posts: 2,277
|
Hi,
Maytag sure has a problem with bake elements.
A lot of times when these elements burn out as yours did it will damage the oven control too.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/2/2008(UTC)
Posts: 2
|
Originally Posted by: ApplianceJunk  Hi,
Maytag sure has a problem with bake elements.
A lot of times when these elements burn out as yours did it will damage the oven control too. I have just encountered the same problem with my Maytag stove model # MER5775QAS. The bake element burnt in half and when one of the burnt ends touched the stove floor it shorted the control panel. Now i have to replace both the bake element and the control panel. This sounds like a product defect to me and should be recalled. At the very least I think Maytag should be responsible to replace these parts. Do you think i have any recourse?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 5/6/2008(UTC)
Posts: 724
Was thanked: 1 time(s) in 1 post(s)
|
Thank goodness for extended warranty:D
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/2/2008(UTC)
Posts: 2
|
Unfortunately the 3 year extended warranty expired this July. Doesnt that figure. Does anyone know how I can go about getting this product recalled? I feel very dupped as a consumer.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
If you believe there is a risk of serious injury or death, you can report it to the US Consumer Product Safety Commission.
Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 7/31/2009(UTC)
Posts: 1
|
my maytag model MER5775QAS burnt the oven burner as well. Replaced the burner and now it will not go above 205 deg, There is no power to the terminals to the bake element. What do I do now?
thanks
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 7/24/2007(UTC)
Posts: 2,277
|
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
If there is no power to the Bake element, but Broil works then the problem is a bad control board (aka a clock). - The clock Part number: AP4100742
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
