Rank: Member
Groups: Registered
Joined: 1/1/2011(UTC)
Posts: 8
|
My fridge stopped working. Found out that my Adaptive Defrost Board was bad. I bought a replacement board and plugged it in. I plugged in the outlet and the fridge started working. When I checked on the fridge 1/2 hour later, it stopped. The new Adaptive Defrost Board was burned on the same spot as the old board. I got another board, but don't want to plug it in yet. Any ideas as to what I should check next. Any help is appreciated. kenmore_no_more attached the following image(s):
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 7/24/2007(UTC)
Posts: 2,277
|
I would check the defrost heater and the defrost thermostat.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 1/1/2011(UTC)
Posts: 8
|
Thanks. What should I look for in these two areas?
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 1/1/2011(UTC)
Posts: 8
|
Originally Posted by: ApplianceJunk  I would check the defrost heater and the defrost thermostat. I can't seem to find these two items... help.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 7/24/2007(UTC)
Posts: 2,277
|
Originally Posted by: kenmore_no_more I can't seem to find these two items... help. They are located in the freezer.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 1/1/2011(UTC)
Posts: 8
|
Originally Posted by: ApplianceJunk They are located in the freezer. lol. thanks, I knew that. I appreciate the help. I'm a novice.... I don't think I'll be going any further. time to call in the calvery.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
