Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

2 Pages12>
Options
Go to last post Go to first unread
darbar  
#1 Posted : Wednesday, August 27, 2008 9:56:44 AM(UTC)
darbar

Rank: Member

Groups: Registered
Joined: 8/27/2008(UTC)
Posts: 7

the oven control panel is very din dose it need replacing or is it something else wrong
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
libertyappl  
#2 Posted : Wednesday, August 27, 2008 10:19:23 AM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097

Start with checking your voltage to the outlet. Is' it just the clock or the controls?
darbar  
#3 Posted : Wednesday, August 27, 2008 12:29:46 PM(UTC)
darbar

Rank: Member

Groups: Registered
Joined: 8/27/2008(UTC)
Posts: 7

The clock is brighter than the controls you can hardley see the controls or timer
Gene  
#4 Posted : Friday, August 29, 2008 10:48:02 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Most likely the problem is a bad EOC (aka clock).

- The part number for the EOC is AP367441

Here are the break down diagrams for the Jenn Air range Model SVE87600B

Gene.
darbar  
#5 Posted : Tuesday, September 2, 2008 2:08:19 PM(UTC)
darbar

Rank: Member

Groups: Registered
Joined: 8/27/2008(UTC)
Posts: 7

Gene,
How hard is it to replace the EOC do you have to replace the membrance also. I had a repair man and he told me it would cost about
$ 600.00 for parts and labor.
Thanks Daryl
Gene  
#6 Posted : Tuesday, September 2, 2008 4:49:00 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Daryl,

I would start with the EOC and you can replace the membrane switch later, if needed.

You can find the complete instructions in the Service manual.

Gene.
darbar  
#7 Posted : Wednesday, September 3, 2008 9:12:26 AM(UTC)
darbar

Rank: Member

Groups: Registered
Joined: 8/27/2008(UTC)
Posts: 7

Gene,
Dose the EOC control the oven because I don't think the oven heats up quite right and the broiler dose not work.

thanks
daryl
Gene  
#8 Posted : Wednesday, September 3, 2008 1:32:24 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Daryl,

The EOC does control the oven temperature and performance by reading the oven sensor and operating with the heating element(s).

Gene.
darbar  
#9 Posted : Wednesday, September 3, 2008 2:40:01 PM(UTC)
darbar

Rank: Member

Groups: Registered
Joined: 8/27/2008(UTC)
Posts: 7

Gene,
Thank you for your time, the repair man said he needed to replace the touch control. Every thing else on the front panel works the burner work and light up. I wonder if this is realy needes to be done. Or is the EOC all it needs. Thanks again,
Daryl
Gene  
#10 Posted : Wednesday, September 3, 2008 3:17:29 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: Gene Go to Quoted Post
Daryl,

I would start with the EOC and you can replace the membrane switch later, if needed.

You can find the complete instructions in the Service manual.

Gene.



You can do what I recommended or you can follow your tech recommendation. If you'll follow my advise there is a chance to save some $$$$ (if you are going to DIY).

Gene.
Users browsing this topic
Guest (2)
Similar Topics
Jenn-Air Cook Top Gas Range JGC1526ADS15 (Oven Repair (including Ranges and Cooktops))
by patelvi 9/15/2021 1:11:05 PM(UTC)
Jenn-Air Cook Top Element Problem (Oven Repair (including Ranges and Cooktops))
by bmwed 3/16/2012 4:58:37 PM(UTC)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.