Washer won't spin, and motor overheats - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Washer won't spin, and motor overheats Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: UNKNOWN	Brand: Frigidaire	Age: 1 - 5 years
Previous Topic Next Topic

rwstern		#1 Posted : Tuesday, August 26, 2008 10:51:38 AM(UTC)
Rank: Member Groups: Registered Joined: 8/26/2008(UTC) Posts: 2		This is a 3 year old Frigidaire Gallery washing machine. The model/serial number is posted on a non-permanent label inside the washer lid (bad location), and it is no longer legible, so I have been unable to determine the model. However, about two times out of three uses, the machine locks up when it is supposed to spin, resulting in the motor overheating and smelling. I can open the lid, and give the tub a manual spin, close the lid, and the cycle resumes successfully. The next wash load may complete without issue. But the machine cannot be left alone as I'm sure it would burn out the motor is left unattended during one of its "problem cycles". How can I determine what is causing the problem? Thanks.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

libertyappl		#2 Posted : Tuesday, August 26, 2008 11:09:15 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		If you can locate a part number off the motor or controls Might be able to reverse the look up process and figure out which model you have. Post whatever numbers/letters you can see. Nat


User Profile View All Posts by User View Thanks

rwstern		#3 Posted : Saturday, August 30, 2008 7:32:52 AM(UTC)
Rank: Member Groups: Registered Joined: 8/26/2008(UTC) Posts: 2		Originally Posted by: libertyappl If you can locate a part number off the motor or controls Might be able to reverse the look up process and figure out which model you have. Post whatever numbers/letters you can see. Nat The Frigidaire model number is GLWS1649AS4. Hope this helps.


User Profile View All Posts by User View Thanks

libertyappl		#4 Posted : Saturday, August 30, 2008 9:56:25 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		By looking at your machines breakdown, I'd have to say the transmission is going out. Part #AP3892126 although not exactly easy to change out. Nat


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (4)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close