Kenmore Dryer - Timer not moving with No heat and dryer does not shut off - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Kenmore Dryer - Timer not moving with No heat and dryer does not shut off Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: 110.C66532500	Brand: Kenmore	Age: 5 - 10 years
Previous Topic Next Topic

poslow		#1 Posted : Sunday, November 21, 2010 4:18:55 PM(UTC)
Rank: Member Groups: Registered Joined: 11/21/2010(UTC) Posts: 2		My Kenmore Dryer of about 5 years, model 110.C66532500 29" cabinet is not functional. I noted that the timer is not moving with no heat coming out and the dryer does not shut off. I have gone on to search the forum. Could it be the problem of the timer ?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

poslow		#2 Posted : Sunday, November 21, 2010 6:35:41 PM(UTC)
Rank: Member Groups: Registered Joined: 11/21/2010(UTC) Posts: 2		My Kenmore Dryer of about 5 years, model 110.C66532500 29" cabinet is not functional. I noted that the timer is not moving with no heat coming out and the dryer does not shut off. I have gone on to search the forum. Could it be the problem of the timer ? ================================= I stripped off the back of the dryer, went through the forum's posting carefully. I took out the Dryer Heating Element and found a break in the coil. The part number of this Dryer Heater Element is :- Whirlpool Electric Dryer Heating Element 279838. I think this could be the problem ??? ----------------------------------------------


User Profile View All Posts by User View Thanks

denman		#3 Posted : Sunday, November 21, 2010 9:10:49 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Yes that is probably your problem. In many units when in an auto mode the timer motor gets power through the heating coil when the coil is off. Therefore a bad (open) heating coil will stop the timer advancing. Note: In a timed dry mode the timer motor usually gets power directly from the line so it should have advanced in timed dry.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close