Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Dishwasher does not fill with water
Options
Go to last post Go to first unread
Model: PDW7880G00SS Brand: GE Age: 5 - 10 years
Previous Topic Next Topic
HarryW  
#1 Posted : Friday, November 19, 2010 6:18:20 PM(UTC)
HarryW

Rank: Member

Groups: Registered
Joined: 11/19/2010(UTC)
Posts: 5
My GE dishwasher does not fill with water. I have checked the Solenoid Water Valve and it is working properly.
Any suggestions of what else can be wrong?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
denman  
#2 Posted : Saturday, November 20, 2010 12:03:09 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Replacement parts for General Electric PDW7880G00SS Dishwasher | AppliancePartsPros.com
[COLOR="Blue"]
I have checked the Solenoid Water Valve and it is working properly.[/COLOR]
Sorry but I do not understand, if the valve is working correctly the unit would fill.
Please supply more info on how you tested it and the results.
THIS FORUM IS DEAD!!!!!!!
Back to top
HarryW  
#3 Posted : Saturday, November 20, 2010 4:33:18 AM(UTC)
HarryW

Rank: Member

Groups: Registered
Joined: 11/19/2010(UTC)
Posts: 5
Originally Posted by: denman Go to Quoted Post
Here are your parts
Replacement parts for General Electric PDW7880G00SS Dishwasher | AppliancePartsPros.com

I have checked the Solenoid Water Valve and it is working properly.
Sorry but I do not understand, if the valve is working correctly the unit would fill.
Please supply more info on how you tested it and the results.


I removed the Valve and Checked the Ohms across the valve. I also connected to a different power source and the Valve opened.
Back to top
denman  
#4 Posted : Saturday, November 20, 2010 8:48:56 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Did you check it when it was in the machine.
If it is getting 120 volts and not opening then it is toast.
[COLOR="Blue"]
I also connected to a different power source and the Valve opened.[/COLOR]
Was the unit still on the machine with a water supply to it and did the machine start filling.
If yes then then next thing to check is the overflow switch as it is wired in series with the fill valve.
THIS FORUM IS DEAD!!!!!!!
Back to top
HarryW  
#5 Posted : Saturday, November 20, 2010 10:41:07 AM(UTC)
HarryW

Rank: Member

Groups: Registered
Joined: 11/19/2010(UTC)
Posts: 5
Originally Posted by: denman Go to Quoted Post
Did you check it when it was in the machine.
If it is getting 120 volts and not opening then it is toast.

I also connected to a different power source and the Valve opened.
Was the unit still on the machine with a water supply to it and did the machine start filling.
If yes then then next thing to check is the overflow switch as it is wired in series with the fill valve.


Yep.. I also checked the FLoat switch. The float switch was broken so I replaced it. Still not water....
Back to top
HarryW  
#6 Posted : Saturday, November 20, 2010 10:45:44 AM(UTC)
HarryW

Rank: Member

Groups: Registered
Joined: 11/19/2010(UTC)
Posts: 5
Originally Posted by: HarryW Go to Quoted Post
Yep.. I also checked the FLoat switch. The float switch was broken so I replaced it. Still not water....
'

A couple more things:
There is no voltage reading at the water valve nor at the Float switch when running the dishwasher in rinse mode.
I ran the service Mode of the dishwasher. I pressed Cookware + Heated dry for 3 seconds then ran through the service modes. 4L - Drain pump did not activate; however I dumped some water in the dishwasher with a bucket and when I hit the reset button, it pumps the water out of the dishwasher. 5L does not activate Water Valve.

I am stumpted!
Back to top
denman  
#7 Posted : Saturday, November 20, 2010 1:47:05 PM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
If you have no voltage across the water valve/ overfill switch combo and the wires up to the control board are OK then odds are that the control board is toast.
THIS FORUM IS DEAD!!!!!!!
Back to top
HarryW  
#8 Posted : Sunday, November 21, 2010 6:39:19 AM(UTC)
HarryW

Rank: Member

Groups: Registered
Joined: 11/19/2010(UTC)
Posts: 5
Thank you for all your input!
Back to top
dmatocha  
#9 Posted : Monday, July 21, 2014 5:30:17 AM(UTC)
dmatocha

Rank: Member

Groups: Registered
Joined: 7/21/2014(UTC)
Posts: 1
Originally Posted by: denman Go to Quoted Post
If you have no voltage across the water valve/ overfill switch combo and the wires up to the control board are OK then odds are that the control board is toast.


The control board being the "mother" board? I have the same no fill with my PDW7880G00SS dishwasher. I have replaced the water fill valve, the float swith and the "mother" board. I have confirmed the dishwasher does have a source of water. No water filling the machine. All other functions appear to be working fine.

Would a control switch (outside the machine used to control cycles and start the dishwasher) be the cause? All wiring appears to be intact. Nothing obviously broken or disconnected.

Thanks in advance for any help.
Back to top
Users browsing this topic
Guest (5)
Similar Topics
Dishwasher does not fill with water - spray arms not moving (Dishwasher Repair)
by gilwood 7/16/2010 6:43:27 AM(UTC)
dishwasher does not fill with water - missing float (Dishwasher Repair)
by TOM COTTER 3/13/2009 3:20:30 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET