Help with removing old refrigerator door handle to replace with new - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Help with removing old refrigerator door handle to replace with new Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: ED25DQXDN	Brand: Whirlpool	Age: More than 10 years
Previous Topic Next Topic

calvinsammi		#1 Posted : Friday, August 8, 2008 8:30:16 AM(UTC)
Rank: Member Groups: Registered Joined: 8/8/2008(UTC) Posts: 3		I have a dented refrigerator handle that I would like to replace. Unfortunately our owners manual does not address this issue. The screw holes are covered with a small panel or font of some kind and I do not want to damage this, as I am sure that I will need to use it to cover up the screw holes, etc when the new handle is in place. Any ideas how to remove this panel? Thanks!


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

abadfish66		#2 Posted : Friday, August 8, 2008 8:57:53 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 5/28/2008(UTC) Posts: 1,620		This should help Model ED25DQXDN00


User Profile View All Posts by User View Thanks

calvinsammi		#3 Posted : Friday, August 8, 2008 9:28:23 AM(UTC)
Rank: Member Groups: Registered Joined: 8/8/2008(UTC) Posts: 3		Thanks, but I already know the model number of the refrigerator and the part number for the handle also. I need to know how to take off the handle to put on the new one. If that was in your message, I missed it. Thanks!


User Profile View All Posts by User View Thanks

abadfish66		#4 Posted : Friday, August 8, 2008 9:34:59 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 5/28/2008(UTC) Posts: 1,620		Did you click on the model# in my message, that will take you to the parts breakdown so you can see how it is attached, and what needs to be taken off to replace the handle.


User Profile View All Posts by User View Thanks

calvinsammi		#5 Posted : Friday, August 8, 2008 6:22:21 PM(UTC)
Rank: Member Groups: Registered Joined: 8/8/2008(UTC) Posts: 3		Thanks so much for trying...but when clicking on the model number and then scrolling down to the actual area where the part is (in this case the refrigerator or freezer door, as they both have the same handles), when you click on the handle, part # AP2986478, it comes up with no image.... hence, there are no directions that I can see or access. Unless, I am doing something wrong. Thanks again!:)


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close