Rank: Member
Groups: Registered
Joined: 7/25/2008(UTC)
Posts: 5
|
I need to replace the custom control kit for the FR burner on my smooth cooktop. This kit (part 12002723) is a modified part and replaces the original part however some wiring modifications have to be done - i basically need a wiring diagram for this part to help me out with this please. thanks:).
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Hopefully the information and instructions from the tech sheet will help you. Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 7/25/2008(UTC)
Posts: 5
|
Thanks for this info Gene, however this diagram doesn't provide any information on wiring for the new switch part #12002723 - one side of the switch has 6 prongs and other side has 2 prongs - nothing is labelled, so we are having a hard time figuring out the wiring. thanks again.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
HUBI,
If you can post pictures of the old and new parts with all terminals, it might help.
Gene.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 7/25/2008(UTC)
Posts: 5
|
Gene, Here is the picture - the left is the old control which has everything clearly labelled. the new control i need to put in is on the right. thanks. HUBI attached the following image(s):
|
|
|
|
|
|
Rank: Administration
Groups: Administrators
Joined: 7/18/2007(UTC)
Posts: 214
|
Hubi,
It is possible you have a mispacked part if you received the part shown on the right. So I can very that to be the case please call me at 1-877-477-7278 x 105 so I can ask a few more questions
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 7/25/2008(UTC)
Posts: 5
|
will definately call you - thanks.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 7/25/2008(UTC)
Posts: 5
|
Adam,
Tried calling your # today (Saturday) but the office was closed so ended up going to another appliance part store in town here just to confirm the part. Turns out we got the wrong part put in the right box (box was labelled correctly with the part # etc). I will call the supplier on Monday and let them know about this mix-up. Has definately been a stressful week trying to figure out this part. I appreciate all your help. Your post actually led me to investigate further that maybe the part was incorrect. Thank-you.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
