Kitchenaid refrig: defrost not working leading to icy refrigerator - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Kitchenaid refrig: defrost not working leading to icy refrigerator Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: KSRSIL25SS02	Brand: Kitchen Aid	Age: 5 - 10 years
Previous Topic Next Topic

osbock		#1 Posted : Wednesday, October 13, 2010 4:33:52 PM(UTC)
Rank: Member Groups: Registered Joined: 10/13/2010(UTC) Posts: 4		I recently replaced the damper on my Kitchenaid side by side for the second time. The first time, it seemed to have just burnt out and stuck shut. replacing it restored function. The second time, it was stuck open (and there was frost that probably caused it to burn out.) Everything in the refrigerator was freezing. It progressively got worse, and I started noticing frost buildup in the freezer, so I now suspect something wrong with the defrost. How do I diagnose this? I found several references, but mostly to older mechanical things, and I can't find the specifics for my fridge. I tried the hold the power button and water filter button together, but that doesn't bring up any diagnostics. If you have a service manual link that would be appreciated. Is the only control for this in the main control board, or is there a separate thermostat/control for defrost?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

osbock		#2 Posted : Thursday, October 14, 2010 5:51:00 PM(UTC)
Rank: Member Groups: Registered Joined: 10/13/2010(UTC) Posts: 4		Ok, after removing many parts(they don't make this easy!) I beeped out the bimetal, and it is open. This is at room temperature (now around 68 F.) Do I need to chill it to test conclusively? Also I see the replacement part comes with plain leads. How do I remove the old one and install the new one into the plug into which it is wired? Perhaps this is a faq, but I haven't seen it. Also, measuring resistance across the defrost heater I get 0 ohms. So it's not open, but looks like a short, unless I'm in the wrong range or something (it's not an autoranging multimeter.)


User Profile View All Posts by User View Thanks

Gene		#3 Posted : Thursday, October 14, 2010 8:02:38 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Answered here: http://forum.appliancepartspros...warm-106.html#post287399 Gene.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close