Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
renes  
#1 Posted : Tuesday, July 22, 2008 8:41:25 PM(UTC)
renes

Rank: Member

Groups: Registered
Joined: 7/22/2008(UTC)
Posts: 2

I have a kenmore diswasher that won't start. When I put it into the Diagnostics Cycle (using SANI RISE-AIR DRY-SANI RINSE-AIR DRY) all of the keypad LEDs come on and all segments of the two digit display come on. I've taken a multimeter and checked internal wiring. The vent actuator assembly and float switch may be suspect. I'm not sure if either of these two items would cause the front panel to light up as it does. Perhaps the control board is kaput ?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Wednesday, July 23, 2008 6:01:26 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
What happens if you try to start the dishwasher?

Gene.
renes  
#3 Posted : Thursday, July 24, 2008 2:23:25 PM(UTC)
renes

Rank: Member

Groups: Registered
Joined: 7/22/2008(UTC)
Posts: 2

If I try to start the dishwasher, nothing happens.
Users browsing this topic
Similar Topics
Kenmore Dishwasher not working (Dishwasher Repair)
by Mr. Gooey 7/28/2011 3:50:55 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.