Rank: Member
Groups: Registered
Joined: 9/24/2010(UTC)
Posts: 2
|
whirlpool oven/broiler will not turn on, I can hear the gas solinoid turn on, then off after as second or so, for the oven, have replaced the temp sensor, and controll module, could the problem be in the dsi board? the burners all ignite ok.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: lkaymen  whirlpool oven/broiler will not turn on, I can hear the gas solinoid turn on, then off after as second or so, for the oven, have replaced the temp sensor, and controll module, could the problem be in the dsi board? the burners all ignite ok. Are you sure both the burners in the oven do not work ? I would have to suspect the DSI module or regulator may be at fault,as well as a loose wire, and would start at the DSI module. Do you have a meter, to test the resistance and voltage(s) at the DSI or regulator ? :) :) :)
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
