Outer Tub Seal Leak - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Outer Tub Seal Leak Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: A500	Brand: Maytag	Age: More than 10 years
Previous Topic Next Topic

edatlarge		#1 Posted : Thursday, September 9, 2010 12:01:09 PM(UTC)
Rank: Member Groups: Registered Joined: 9/9/2010(UTC) Posts: 2		IRich Morgan: I have a vintage 1984 Maytag A500 washer. The outer tub has developed a leak around the steel band that holds the top 1/3 to the bottom 2/3's. Is there a replaceable gasket that is under the band?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

applianceman		#2 Posted : Thursday, September 9, 2010 12:24:08 PM(UTC)
Rank: Member Groups: Registered Joined: 3/28/2009(UTC) Posts: 1,648		There is a rubber gasket there that you can replace. However if you haven’t removed the gasket or loosened the clamp you will most likely find that the tub is rusted out right at the seal. If you have taken the gasket off or loosened it try rubbing it with Vaseline and reinstall it. The gaskets give very little trouble unless you remove it, in which case you may have to replace it. Clothes Washer Repair Guide


User Profile View All Posts by User View Thanks

edatlarge		#3 Posted : Thursday, September 9, 2010 4:12:28 PM(UTC)
Rank: Member Groups: Registered Joined: 9/9/2010(UTC) Posts: 2		Thanks for your speedy expert reply.... I have not yet disturbed the seal... so that was why I asked. I knew once I would open it up I would have to have a plan. A leak can only get worse. It sounds like rust may be the final downfall. I may see if I can get a gasket standing by when I do if the rust hasn't already killed it!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close