Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

2 Pages12>
Options
Go to last post Go to first unread
mph151  
#1 Posted : Friday, July 23, 2010 8:41:43 AM(UTC)
mph151

Rank: Member

Groups: Registered
Joined: 7/23/2010(UTC)
Posts: 5

I have a Whirlpool model GS6NBEXRB01 the freezer is icing over. I defrosted it and replaced the defrost thremistat but the ice is building back up. Dose this unit have a defrost timer or is it handled by the main control board where the tempertature control knobs are? Any ideas on what the problem might be?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
richappy  
#2 Posted : Friday, July 23, 2010 9:01:23 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
If your heater looks ok, you probably have a bad control board in the back by the condensing fan, part # AP4334000
mph151  
#3 Posted : Friday, July 23, 2010 9:11:22 AM(UTC)
mph151

Rank: Member

Groups: Registered
Joined: 7/23/2010(UTC)
Posts: 5

Thanks for the fast reply.
The heater coils look good.
I'll replace the board
richappy  
#4 Posted : Friday, July 23, 2010 10:52:12 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
The defrost heaters rarely fail particularily if it is a iron (calrod) heater, but you could test it with a meter if you have one.
mph151  
#5 Posted : Monday, August 23, 2010 6:17:30 AM(UTC)
mph151

Rank: Member

Groups: Registered
Joined: 7/23/2010(UTC)
Posts: 5

I replaced the freezer control board and the freezer now goes into it’s defrost cycle but the refrigerator half still is not getting cold enough. I turned up the temp controls but it is still only 49 degrees which my thermometer says is on the boarder of spoilage. There is air flow from the vents from the freezer to the refrigerator and no ice build up. How do I get it colder inside the refrigerator? Any more ideas on this?
richappy  
#6 Posted : Wednesday, August 25, 2010 2:54:07 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Measure the temperature at the back wall of the freezer and post.
mph151  
#7 Posted : Wednesday, August 25, 2010 4:27:23 AM(UTC)
mph151

Rank: Member

Groups: Registered
Joined: 7/23/2010(UTC)
Posts: 5

With both cold settings up to highest setting freezer temp is -5 but fridge is still only at 50.
richappy  
#8 Posted : Wednesday, August 25, 2010 5:04:37 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Check for a blocked air return vent behind the crisper drawers.
mph151  
#9 Posted : Monday, August 30, 2010 2:29:13 PM(UTC)
mph151

Rank: Member

Groups: Registered
Joined: 7/23/2010(UTC)
Posts: 5

I checked and the freezer is still not defrosting after changing the controll board and the defroster bimettel. Could the new control board be bad too?
richappy  
#10 Posted : Tuesday, August 31, 2010 1:09:46 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
I would go to www.applianceaid.com for specific routine to manually force defrost to see if the board is working.
Users browsing this topic
Guest (2)
Similar Topics
Freezer will not defrost (Refrigerator & Freezer Repair)
by todhurd 9/26/2013 11:54:42 AM(UTC)
Freezer will not Defrost (Refrigerator & Freezer Repair)
by friendlytx2 4/14/2012 10:36:49 AM(UTC)
freezer will not defrost (Refrigerator & Freezer Repair)
by mrnonutz 6/16/2010 8:17:10 AM(UTC)
Freezer will not defrost (Refrigerator & Freezer Repair)
by MarcusPizzorno 10/26/2009 11:35:52 AM(UTC)
freezer will not defrost (Refrigerator & Freezer Repair)
by barneyrubble 6/8/2009 6:16:00 PM(UTC)
Frigidaire: Freezer will not Defrost (Refrigerator & Freezer Repair)
by dbolan 4/28/2009 5:06:19 AM(UTC)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.