Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Brian T  
#1 Posted : Saturday, July 5, 2008 2:32:21 PM(UTC)
Brian T

Rank: Member

Groups: Registered
Joined: 7/5/2008(UTC)
Posts: 3

Originally my fridge quite providing water; however after trying to troubleshoot my unit, I believe I may damaged some circuitry cause now the ice maker quit also. The fridge and freezer sections work, but I get no ice or water from my dispenser. Does the fridge have a fuze on this circuit? If so, where can I find it? Any other ideas? Finally is there a water filter that needs to be serviced?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Saturday, July 5, 2008 5:18:26 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Does the ice maker produce ice cubes?

Gene.
P.S. What is the complete model number of the refrigerator?
Brian T  
#3 Posted : Saturday, July 5, 2008 6:51:40 PM(UTC)
Brian T

Rank: Member

Groups: Registered
Joined: 7/5/2008(UTC)
Posts: 3

Gene, thanks for reply. Yes the unit still makes ice cubes.

Complete Model Number: ED22PWXXW00
Type: 22SSA92.
Gene  
#4 Posted : Saturday, July 5, 2008 7:11:08 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi Brian,

Check the wire harness at the freezer top door hinge.

Check the freezer light switch.

Here are the break down diagrams for the Whirlpool refrigerator Model ED22PWXXW00

Gene.
Brian T  
#5 Posted : Saturday, July 5, 2008 7:29:26 PM(UTC)
Brian T

Rank: Member

Groups: Registered
Joined: 7/5/2008(UTC)
Posts: 3

Thanks Gene, light works in freezer, so assume switch is ok. I'll look over the other info tonight; Prior to me mucking around the light (night light) and ice dispenser worked...however as I was checking the water dispenser micro switch for continuity, one of the loose wires arc'd when the wire touched the support frame. Now seems as if I get no power to this module.
Gene  
#6 Posted : Monday, July 7, 2008 11:49:02 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi Brian,

As you can see from the wiring diagram , the freezer light switch has two positions and switches power between the freezer light and the dispensers. You have to remove the switch and check it for continuity across the terminals 1 & 3 while the switch is depressed.

Post the results.

Gene.
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.