Kenmore Elite HE3 Dryer runs but won't heat up - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Kenmore Elite HE3 Dryer runs but won't heat up Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: 110.92832100	Brand: Kenmore	Age: 1 - 5 years
Previous Topic Next Topic

Ives		#1 Posted : Monday, August 23, 2010 2:55:20 PM(UTC)
Rank: Member Groups: Registered Joined: 8/23/2010(UTC) Posts: 1		Worked fine yesterday, wife put a load of clothes in today and dryer never heated up to dry clothes. I read a lot of other posts,. but none of them had same model number. Need help, hate to call service man if I can DIY. Where do I start? Thanks Ives


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Tuesday, August 24, 2010 8:21:39 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here is your tech sheet http://www.servicematters.com/d...0Sheet%20-%203980060.pdf I would start by checking the power Try flipping the breaker off/on slowly a couple times, sometimes you can loose half the line without actually tripping the breaker. If this does nothing, check the voltage at the plug L1 to L2 should be 240 volts L1 to Neutral and L2 to Neutral, both should be 120 volts. If OK Unplug the unit and check the wires at the terminal strip in the machine to make sure none are loose or burned out If OK Check the power at the terminal strip. [COLOR="Red"]Be careful as 240 volts is lethal !!! [/COLOR]
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Dennis Stroklund		#3 Posted : Tuesday, August 24, 2010 9:20:21 AM(UTC)
Rank: Member Groups: Registered Joined: 8/24/2010(UTC) Posts: 2		HI Denman, i am in experienced in using this site. Can you take a look at the post I put in the Dryer section at 11:50 this AM. I need to head to town soon for paarts it is quite a drive and I need to get stated if I plan on getting this fixed today. Dennis Stroklund


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close