water not spraying from the lower and upper arm, - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

water not spraying from the lower and upper arm, Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: GU1200XTLQ0	Brand: Whirlpool	Age: 1 - 5 years
Previous Topic Next Topic

jamesg		#1 Posted : Sunday, June 15, 2008 8:06:17 AM(UTC)
Rank: Member Groups: Registered Joined: 6/12/2008(UTC) Posts: 4		I have whirlpool model GU1200XTLQ0 and I have problem with water not spraying from the lower and upper arm, what I’ve read is it’s probably the impeller section, so I taking the whole thing apart, I ordered the new part, not here yet, but how does the impeller that’s on the motor come apart, I read you have brake because it’s glued on, so my question how does the new goes on the motor, do I have to order the glue Thanks for you’re help Regards James


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

jamesg		#2 Posted : Friday, June 20, 2008 10:21:13 AM(UTC)
Rank: Member Groups: Registered Joined: 6/12/2008(UTC) Posts: 4		Please can someone help me out, I received the for the impeller from appliance parts, but still have no idea how the new part stay on the shaft after removing the old one, thanks


User Profile View All Posts by User View Thanks

okbobcats		#3 Posted : Tuesday, June 24, 2008 3:27:38 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 10/2/2007(UTC) Posts: 129		Does the pump turn and move easy. Are u sure you just did not have some junk in the chopper area. Which would block the water from reaching the pump. Really have not seem to many pumps go bad. Motors yes. Check the chopper area for junk.


User Profile View All Posts by User View Thanks

jamesg		#4 Posted : Wednesday, June 25, 2008 8:41:50 AM(UTC)
Rank: Member Groups: Registered Joined: 6/12/2008(UTC) Posts: 4		Thank for the reply, yes to answer your question the motor is running fine but the copper was clogged with junk, but the impeller has plastic part that connects to the copper section to rotated, do to the junk it worn out the plastic, so I had to replace it, but my problem was the new impeller hole was made for (.2 inch) screw but the shaft of the motor is (.3 inch in diameter), so I had to enlarge using 5/16 TAP and everything is fine, Regards James


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close