Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
rleal79  
#1 Posted : Friday, June 13, 2008 5:31:41 AM(UTC)
Quote
rleal79

Rank: Member

Groups: Registered
Joined: 9/23/2007(UTC)
Posts: 6

Hi!
I have a Whirlpool model ED22DQXEB01 refrigerator, recently the icemaker started over flowing with water. I replaced the water valve that provides the water to the water despenser and the water to the icemaker. The water despenser continues to work but there is no water to the ice maker tray. The hose from the the water valve is not stopped up. I have had this refrigerator about 15 years. I have had to replace the water valve on a yearly basis. I did replaced the full ice maker about three years ago. I dont want to replace the ice maker unless that is the problem? The ice thing that pushes the ice out of the tray is at 12 oclock. I have raised the icemaker arm up and down and nothing happens?

Thanks Rod
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Friday, June 13, 2008 5:59:35 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 3 time(s) in 3 post(s)
Hi Rod,

Perform tests as described in one of our previous posts http://forum.appliancepartspros...-maker-quit-working.html and post the results.

Gene.
rleal79  
#3 Posted : Saturday, June 14, 2008 8:42:37 AM(UTC)
Quote
rleal79

Rank: Member

Groups: Registered
Joined: 9/23/2007(UTC)
Posts: 6

Hi!
performed multimeter test nothing occurred,

Thanks Rod
rleal79  
#4 Posted : Sunday, June 15, 2008 12:16:14 PM(UTC)
Quote
rleal79

Rank: Member

Groups: Registered
Joined: 9/23/2007(UTC)
Posts: 6

does the refrigerator have a breaker or fuse that i can replace. Everything works except the ice maker?

Thanks Rod
Gene  
#5 Posted : Sunday, June 15, 2008 3:20:22 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 3 time(s) in 3 post(s)
If there is no 120VAC between the "L" & "N" test points, remove the ice maker and check the black wire in the ice maker wire harness for continuity. If there is no continuity then the thermal fuse which is spliced into the black wire is open due to excessive heat.

I would recommend to replace the ice maker in such case.

- The part number for the ice maker is AP2984633

Here are the break down diagrams for the Whirlpool refrigerator Model ED22DQXEB01

Gene.
rleal79  
#6 Posted : Friday, June 20, 2008 2:07:04 PM(UTC)
Quote
rleal79

Rank: Member

Groups: Registered
Joined: 9/23/2007(UTC)
Posts: 6

Hi!
I replaced the ice maker and everything is working fine.

Thanks Rod
Gene  
#7 Posted : Friday, June 20, 2008 3:21:43 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 3 time(s) in 3 post(s)
Hi Rod,

I'm glad you were able to fix it.

Gene.
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.