Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
kenmore not agitating
Options
Go to last post Go to first unread
Model: 110.26882503 Brand: Kenmore Age: 1 - 5 years
Previous Topic Next Topic
bontree  
#1 Posted : Thursday, April 10, 2008 6:32:58 PM(UTC)
bontree

Rank: Member

Groups: Registered
Joined: 4/10/2008(UTC)
Posts: 4
Spin motor works ok but the wash motor trips out at 27amps and there is no movement with the agitation. Does the motor turn in two directions, oue wash and another for spin? is it likely that the transmition needs replaced? thanks for the advice!
Jim
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Friday, April 11, 2008 2:05:43 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Jim,

Remove the washer cabinet, remove the pump and the motor.

Check if the motor will work while the control calls for the agitation and would not heat up. If you can, check for amps drawn. If it's not working properly and/or heats up then the motor is bad.

If there is nothing wrong with the motor - try to move the transmission shaft in both directions.

Post your findings.

Gene.
Back to top
bontree  
#3 Posted : Monday, April 21, 2008 2:26:57 PM(UTC)
bontree

Rank: Member

Groups: Registered
Joined: 4/10/2008(UTC)
Posts: 4
Gene,
sorry for taking so long to get back I have not been able to get back to the appliance, but can tell you that the motor works in the spin mode. With my amprobe I haad 27amps when power was applied to the agitat motor leeds. The drain pump works when the machine spins The agitator seemed to move freely when I turned it by hand with the machine off. It seems like there is something binding the motor in the agitate only. I am still trying to get back to see the machine. Thanks Jim
Back to top
Gene  
#4 Posted : Monday, April 21, 2008 2:38:45 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
bontree

What is going on? Did you find anything?

Gene.
Back to top
bontree  
#5 Posted : Thursday, June 19, 2008 4:45:30 AM(UTC)
bontree

Rank: Member

Groups: Registered
Joined: 4/10/2008(UTC)
Posts: 4
Gene,
I removed the motor and it would not run untill I turned it by hand. Is there a start capacitor on the motor or are the start windings out? Motor works on Spin ok. I will be replacing the motor. thanks for your help.
Jim
Back to top
Gene  
#6 Posted : Thursday, June 19, 2008 10:30:58 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi Jim,

Looks like the motor gone bad.

- The part number for the motor is AP4108781

Gene.
Back to top
Users browsing this topic
Guest (2)
Similar Topics
Kenmore not agitating or spining? (Washer Repair)
by wjob 1/17/2014 10:24:20 AM(UTC)
kenmore not agitating (Washer Repair)
by bontree 4/10/2008 6:35:59 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET