Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
serenity of three  
#1 Posted : Wednesday, July 28, 2010 2:37:15 PM(UTC)
serenity of three

Rank: Member

Groups: Registered
Joined: 7/28/2010(UTC)
Posts: 2

I have a Whirlpool oven, everything is working on the stovetop (range) but the oven down below will not work. I think it may be the thermal fuse but I can't seem to locate it. I don't see any diagrams in the owner's manual. Does anyone have any helpful info?:confused:
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Wednesday, July 28, 2010 5:30:27 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
The model number you posted is incorrect. Verify and repost please.

Gene.
serenity of three  
#3 Posted : Thursday, July 29, 2010 5:23:10 AM(UTC)
serenity of three

Rank: Member

Groups: Registered
Joined: 7/28/2010(UTC)
Posts: 2

Sorry the correct number is model #RF302BXGWO. I spoke with a whirlpool representative who informed me that this model does not have a fuse so now I am back to looking at either the thermostat (which to me does not seem logical because I don't have any power in the stove it's not just a degrees issue) or the selector switch. Does anyone know which one it would most likely be? Also does anyone out there know of any reputable used appliance parts sites that would save me a couple of bucks?
Gene  
#4 Posted : Thursday, July 29, 2010 2:09:11 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Are both the Bake and Broil not working?

If it's just the Broil, then there is the thermal fuse for the Broil only. It's shown as #23 on the diagram.

Otherwise pull the range out of the wall. Remove the rear panel and check all wires between the heating elements and the controls.

Check the selector switch and the thermostat for continuity according to the Wiring diagram.

Here are the breakdown diagrams and Replacement parts for WHIRLPOOL RF302BXGW0 | AppliancePartsPros.com

Gene.
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.