Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Bob Hunt  
#1 Posted : Friday, July 9, 2010 3:29:18 PM(UTC)
Bob Hunt

Rank: Member

Groups: Registered
Joined: 7/9/2010(UTC)
Posts: 7

Amana model # ARS9265BB.
Worked great since 2005, then stopped cooling this past weekend for 2 days and then started back cooling. Could hear circulation fan running in freezer side, lights worked, but no cooling.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
richappy  
#2 Posted : Saturday, July 10, 2010 1:30:38 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
What was running/not running when it failed?
Bob Hunt  
#3 Posted : Saturday, July 10, 2010 4:47:22 AM(UTC)
Bob Hunt

Rank: Member

Groups: Registered
Joined: 7/9/2010(UTC)
Posts: 7

It just stopped cooling. Could hear the fan running on the freezer side when I opened the freezer door. Started back cooling about 36 to 48 hours later. Any ideas?
richappy  
#4 Posted : Saturday, July 10, 2010 5:20:45 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Your evaporator fan and compressor are wired in parallell through splices. I would check all connectors in the control panel for a burnt, loose splice or wire. You can remove all connectors and spay them with a non-residue contact cleaner, then plug them in.
The other area would be the compressor terminals, look for a burnt/loose wire.
Bob Hunt  
#5 Posted : Saturday, July 10, 2010 4:29:14 PM(UTC)
Bob Hunt

Rank: Member

Groups: Registered
Joined: 7/9/2010(UTC)
Posts: 7

Stopped cooling again last night. Will check and clean connections and look for loose or burnt wires. Would a faulty capacitor cause this problem.
Thank you.
richappy  
#6 Posted : Sunday, July 11, 2010 12:42:49 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
If the compressor is cold when it fails, that would rule out a faulty capacitor.
Bob Hunt  
#7 Posted : Tuesday, July 13, 2010 1:49:34 PM(UTC)
Bob Hunt

Rank: Member

Groups: Registered
Joined: 7/9/2010(UTC)
Posts: 7

The overload relay was faulty. When I removed it, I could hear it rattling.
Installed a new one a couple of hours ago, and it seems to be functioning normally.
Thanks for your replies.
Bob
Users browsing this topic
Guest (5)
Similar Topics
Refrig not cooling. (Refrigerator & Freezer Repair)
by jpskins 7/23/2014 4:24:01 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.