Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
2 Pages12>
Dryer Tumbles but No Heat
Options
Go to last post Go to first unread
Model: FEQ1442ES0 Brand: Frigidaire Age: 1 - 5 years
Previous Topic Next Topic
cshirley  
#1 Posted : Thursday, June 5, 2008 11:19:01 AM(UTC)
cshirley

Rank: Member

Groups: Registered
Joined: 6/5/2008(UTC)
Posts: 9
Ok I have checked the following:

Outlet: 243V
Heating Element: 11.2 ohms, 0V
Control Thermistor: 9.6 kohm, 2V when running. Bypassed throws error and no start.
Thermal Limiter: 0.6 ohms, 0V
Motor Runs
High Limit Thermostat: 0.6 ohms, 0V, bypassed No heat

I keep hearing about a thermal fuse but I don't see it on the diagram or visibly unless it has a different name and is one of the above.

I'm not sure what I'm missing hear. The dryer is a 2005 and very clean. The heating issue didn't just gradually get cooler it stopped all of the sudden.

I am attaching the wiring diagram with values written in where I have tested.

I really appreciate any help...

UserPostedImage
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
abadfish66  
#2 Posted : Thursday, June 5, 2008 11:40:36 AM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620
If my math is correct, the element should read 18.75 ohms or close to it. Take a continuity check of the Thermal limiter, that is your thermal fuse, to determine if open or closed. if thermal limiter checks out ok, look at the heater relay on the board, look for loose solder connection, bang the relay with a screwdriver, it may be stuck open.
Back to top
abadfish66  
#3 Posted : Thursday, June 5, 2008 11:44:09 AM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620
Should be the small device with red and orange wires.
Back to top
cshirley  
#4 Posted : Thursday, June 5, 2008 11:45:46 AM(UTC)
cshirley

Rank: Member

Groups: Registered
Joined: 6/5/2008(UTC)
Posts: 9
I looked online a few places that said the ohms were normally between 8-12 so I figured it was ok, but I don't know for sure either. The board looks great and I doubt the banging on it will do anything because I've managed to bang it around a few times working on it. But thanks for the suggestions... keep them coming, it helps.

Also, the high limit thermstat read closed... 0.6 ohms.
Back to top
cshirley  
#5 Posted : Thursday, June 5, 2008 11:46:40 AM(UTC)
cshirley

Rank: Member

Groups: Registered
Joined: 6/5/2008(UTC)
Posts: 9
yeah I checked that and saw 0 ohms and am getting no voltage across it while running.
Back to top
cshirley  
#6 Posted : Thursday, June 5, 2008 11:48:20 AM(UTC)
cshirley

Rank: Member

Groups: Registered
Joined: 6/5/2008(UTC)
Posts: 9
I also bypassed that "thermal limiter" on the diagram with no luck.
Back to top
abadfish66  
#7 Posted : Thursday, June 5, 2008 11:48:46 AM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620
if the relay is stuck open, your heater will not come on. Sometimes giving the relay a whack with the handle end of a screwdriver will free it.
Back to top
abadfish66  
#8 Posted : Thursday, June 5, 2008 11:50:55 AM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620
Rechecked my math, the heater is fine
Back to top
abadfish66  
#9 Posted : Thursday, June 5, 2008 11:52:17 AM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620
Ok, the thermal limiter is fine.
Back to top
abadfish66  
#10 Posted : Thursday, June 5, 2008 11:53:21 AM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620
Did you check for 240v at the wall outlet, or where the plug connects to the dryer?
Back to top
Users browsing this topic
Guest (3)
Similar Topics
Dryer Tumbles But No Heat (Dryer Repair)
by amarh725 11/13/2010 6:34:09 PM(UTC)
Whirlpool Washer-Dryer Tumbles but no heat (Dryer Repair)
by tedhayes 6/27/2009 2:34:42 PM(UTC)
gas dryer tumbles but no heat (Dryer Repair)
by coasty 5/20/2009 6:37:57 PM(UTC)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET