Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Saralyn  
#1 Posted : Friday, May 30, 2008 12:18:44 PM(UTC)
Saralyn

Rank: Member

Groups: Registered
Joined: 5/30/2008(UTC)
Posts: 2

My Amana side-by-side refrigerator stops cooling and making ice about every 7-10 days. However, when I unplug or disconnect the breaker, it restarts, starts cooling and making ice again for another 7-10 days.

Could this be caused by a defective timer or thermostat? Is there a part or several parts that need replacing? Thank you.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
abadfish66  
#2 Posted : Friday, May 30, 2008 12:46:56 PM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620

Are you seeing frost on the back wall of the freezer after 7-10 days?
Saralyn  
#3 Posted : Friday, May 30, 2008 3:04:02 PM(UTC)
Saralyn

Rank: Member

Groups: Registered
Joined: 5/30/2008(UTC)
Posts: 2

No, there is no frost built up. It appears to completely defrost and then work OK for 7-10 days.

Saralyn
abadfish66  
#4 Posted : Saturday, May 31, 2008 12:12:29 AM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620

Has this fridge been moved recently? This one actually stumps me for the simple fact that I have the same fridge in my garage, and mine was doing the same thing, I came to the conclusion that I had a floating restriction in the refrigerant. So I recovered the refrigerant, put on a new filter dryer, and it has been running great for the past 10 months, so Maybe someone else could help here. I doubt a timer or thermostat are at fault.
richappy  
#5 Posted : Saturday, May 31, 2008 3:14:21 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
When the fridg. stops cooling, check and see if the compressor stops, if not you may just have a partial clog in the capillary tube.
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.