washer will only fill with water, won't agitate, spin, drain, etc. - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

washer will only fill with water, won't agitate, spin, drain, etc. Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: 110.22632100	Brand: Kenmore	Age: 1 - 5 years
Previous Topic Next Topic

patsz26		#1 Posted : Wednesday, May 26, 2010 11:36:28 AM(UTC)
Rank: Member Groups: Registered Joined: 5/26/2010(UTC) Posts: 2		Heavy Duty Super Capacity 2 Speed Motor with 3 speed Como's Kenmore Top Load Serial #CL2908176 Type 111 The washer only fills with water. That is the function it will perform! Please help! I've got the back off and the lid switch does work! HELP!!!!


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Gene		#2 Posted : Wednesday, May 26, 2010 8:07:02 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		How did you check the lid switch? If you are sure the lid switch is fine, then remove the wire plug from the water level switch, bypass the V & T wires and see if the washer will start. If it did, replace the water level switch. - The water level switch Part number: AP3020315 Gene.


User Profile View All Posts by User View Thanks

patsz26		#3 Posted : Wednesday, June 2, 2010 3:06:48 PM(UTC)
Rank: Member Groups: Registered Joined: 5/26/2010(UTC) Posts: 2		How am I supposed to check the lid switch? It clicks and seems to work fine. I cannot lift the lid up to get to the switch. The washer only allows a rear entry. So, I've taken the back off. Is there another way to check it?


User Profile View All Posts by User View Thanks

Gene		#4 Posted : Wednesday, June 2, 2010 8:13:26 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		The lid switch has to be checked for continuity. If you would like to fix it yourself and save some $$$, then you have to gain enough access to the washer. Gene.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close