Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
raminla  
#1 Posted : Wednesday, June 2, 2010 12:14:35 PM(UTC)
raminla

Rank: Member

Groups: Registered
Joined: 6/2/2010(UTC)
Posts: 3

I have a Magic Chef built in oven with electric glow ignitor, I Had to correct a small leak, it worked (lighted up) fine before, I used soapy water to find a leak at the fitting before the regulator where the flex line and shut off valve is located. Model 9112VUV afterward , the Oven wont turn on, the glow ignitor works but the gas is not igniting, I took it all apart again to clear any obstruction if any and still wont light up. As I mentioned before, the gas pressure regulator ,ignitor all worked now it doesnt, all I did was secured a breach at the connector, can anyone explain the Cause?:confused:
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Wednesday, June 2, 2010 6:42:39 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Make sure the gas shut off valve for the range is open and the oven shut off valve on the pressure regulator (red piece) is open as well.

Gene.
raminla  
#3 Posted : Wednesday, June 2, 2010 7:37:23 PM(UTC)
raminla

Rank: Member

Groups: Registered
Joined: 6/2/2010(UTC)
Posts: 3

I did make sure these valves are open however still not firing up.I feel the ignitor is working fine however I am not sure how to test it
Gene  
#4 Posted : Wednesday, June 2, 2010 7:43:23 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Very likely the igniter does not draw enough current to open the gas valve. You have to measure it and if it's 3.2 amps or less, replace the igniter.

- The oven igniter Part number: AP4012072
raminla  
#5 Posted : Wednesday, June 2, 2010 8:06:53 PM(UTC)
raminla

Rank: Member

Groups: Registered
Joined: 6/2/2010(UTC)
Posts: 3

Thank you, I will do as you said.
Gene  
#6 Posted : Wednesday, June 2, 2010 8:09:24 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome. Keep us posted.

Gene.
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.