Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.



Go to last post Go to first unread
#1 Posted : Tuesday, May 11, 2010 12:39:54 PM(UTC)

Rank: Member

Groups: Registered
Joined: 5/11/2010(UTC)
Posts: 1

This is a kemore elitewasher and the agitator and spin cycle is not working. It is also making a loud noise when in those cycles. I thought that maybe a belt was broken and motor was spinning faster than normal producing the sound. I now think this is a direct drive model so no belt. I flipped the unit and there is some oil on the floor and on the bottom of the gear case. This sounds like it is dead:eek:
See inside of your appliance - diagrams and part photos for virtually every model.

powered by
#2 Posted : Tuesday, May 11, 2010 3:01:17 PM(UTC)

Rank: Advanced Member

Groups: Senior Expert
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 2 time(s) in 2 post(s)
Oil from the transmission is not good, but the first thing I would do is remove the washer cabinet (the instructions are attached) and check the motor coupling (#13 on the diagram).

If that noise was not from the transmission, then just refill it with oil and it should last a few more years. You can find some useful information on how to do it in one of our previous threads: http://forum.appliancepartspros...ansmission-oil-fill.html

- The motor coupling Part number: AP3963893
Part number: AP3963893

File Attachment(s):
How to remove the washer cabinet.doc (25kb) downloaded 28 time(s).
How to remove the pump.doc (25kb) downloaded 16 time(s).
How to replace the motor drive coupling.doc (25kb) downloaded 21 time(s).

You cannot view/download attachments. Try to login or register.
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.