Maytag DWU9200abx dishwasher door not seating properly - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Maytag DWU9200abx dishwasher door not seating properly Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: DWU9200ABX	Brand: Maytag	Age: More than 10 years
Previous Topic Next Topic

nrabey		#1 Posted : Monday, March 22, 2010 10:41:47 AM(UTC)
Rank: Member Groups: Registered Joined: 3/22/2010(UTC) Posts: 5		Hi, On a Maytag dishwasher I have replaced the leaking drain line but when I pull up the door it feels like the pivots are misplaced and the door is too low to latch. If I pull the door up the top latches but the lower part of the door is not moving close enough to the main part of the dishwasher to seal. Any ideas? Thanks, Noel


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Tuesday, March 23, 2010 1:31:05 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Replacement parts for MAYTAG DWU9200ABX Dishwasher - Undercounter \| AppliancePartsPros.com Hard to say what has happened without being there but perhaps the following will help http://www.servicematters.com/maytag_library/docs/16007823.pdf
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

nrabey		#3 Posted : Tuesday, March 23, 2010 8:58:33 PM(UTC)
Rank: Member Groups: Registered Joined: 3/22/2010(UTC) Posts: 5		Originally Posted by: denman Here are your parts Replacement parts for MAYTAG DWU9200ABX Dishwasher - Undercounter \| AppliancePartsPros.com Hard to say what has happened without being there but perhaps the following will help http://www.servicematters.com/m...ibrary/docs/16007823.pdf I really appreciate the help Noel


User Profile View All Posts by User View Thanks

nrabey		#4 Posted : Sunday, May 9, 2010 3:24:51 PM(UTC)
Rank: Member Groups: Registered Joined: 3/22/2010(UTC) Posts: 5		Originally Posted by: nrabey I really appreciate the help Noel Thanks very much for the help. It turned out the left hinge was bent and the door latch could not seat properly causing the leak. There turned out to be more problems and I fixed them all with the help Denman provided and it is working fine now. Thanks again Denman for all your help. Noel


User Profile View All Posts by User View Thanks

nrabey		#5 Posted : Sunday, May 9, 2010 3:31:13 PM(UTC)
Rank: Member Groups: Registered Joined: 3/22/2010(UTC) Posts: 5		Originally Posted by: nrabey Thanks very much for the help. It turned out the left hinge was bent and the door latch could not seat properly causing the leak. There turned out to be more problems and I fixed them all with the help Denman provided and it is working fine now. Thanks again Denman for all your help. Noel Sorry for the delayed thanks. This was my first posting and I just got the email about replying when I posted a washer issue. I really did appreciate the help and the manual was invaluable. All the Best, Noel


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (5)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close