Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
pmccullum  
#1 Posted : Thursday, May 8, 2008 3:22:53 PM(UTC)
pmccullum

Rank: Member

Groups: Registered
Joined: 5/8/2008(UTC)
Posts: 1

How do hook my block term back up to my dryer??????
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
SublimeMasterJW  
#2 Posted : Thursday, May 8, 2008 4:34:20 PM(UTC)
SublimeMasterJW

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/6/2008(UTC)
Posts: 724

Was thanked: 1 time(s) in 1 post(s)
Vague question. you mean to the pigtail(cord)simple,
middle wire to middle outer wires to outer terminal.
the dryer usually has a white wire from the harness that goes to the middle(neutral) red to one side for heating and black to the other side for motor. For a 4 wire cord just hook red and black to the sides and white in the middle. hook the green wire to the ground. PSS and GSS refrigerators service manual.pdf (1,717kb) downloaded 85 time(s).
SublimeMasterJW attached the following image(s):
4 wire setup.jpg
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.