Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
LucasN  
#1 Posted : Thursday, April 22, 2010 7:45:07 AM(UTC)
LucasN

Rank: Member

Groups: Registered
Joined: 4/22/2010(UTC)
Posts: 6

I have a whirlpool washer Model # lsr5232lq0,

Just recently the washer, Through the entire spin cycle, started makeing a very loud and rythmic clunking noise, and everytime it does this the washer itself jerks somewhat violently. It also has a very easy to stop spin, If I let it start up with nothing in it The drum will get to full speed But just my finger On the side of the basket can bring it to a stop. The washer still works fine everywhere else, It fills and drains fine, and the aggitation works well I cannot stop it :-)

I took the washer apart and checked a few things, the coupler is still Intact, And the noise almost seems to be coming from the clutch, But I can't make out what would be causing it.

Any help would be apprieciated, I am hoping I get away with just changing a clutch or something to that effect
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
LucasN  
#2 Posted : Thursday, April 22, 2010 9:42:22 AM(UTC)
LucasN

Rank: Member

Groups: Registered
Joined: 4/22/2010(UTC)
Posts: 6

Okay after reading richappys sticky on brake shoes I tryed a few other things. I took just the pump and motor off and tryed spinning the tranny by hand... It does spin but I have to give it some effort after about 4-5 rotations it starts slipping? meaning it takes no pressure to spin and the drum stops moving, It does the for maybe 3-4 rotations of the tranny then clicks back in and drum wants to move again but is VERY hard to turn for a rotation or two.

Am I looking at a brake problem or a clutch problem or both? or is it something else entirely LOL I canot make it make the noise While I am turning it But I assume thats becuase I am not doing it fast enough. Possibly where it slips when that is moving faster I am hearing the brakes lock in?

PLease please give me any insight before I go spending money on parts :)
LucasN  
#3 Posted : Thursday, April 22, 2010 4:04:55 PM(UTC)
LucasN

Rank: Member

Groups: Registered
Joined: 4/22/2010(UTC)
Posts: 6

No thoughts?

I know there's gotta be some good guess at least LOL :P

At a complete loss on what this could be really needin some help!
LucasN  
#4 Posted : Thursday, April 22, 2010 7:15:01 PM(UTC)
LucasN

Rank: Member

Groups: Registered
Joined: 4/22/2010(UTC)
Posts: 6

Well we think we figured out the problem :-) we finally opened up the transmission after more trial and error on the other pieces and the main spinning gear was eatin up really badly, So it looks like a new gear for me !
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.